Mechanical Engineering Final Year Project Research Topics

Mechanical Engineering Project Topic: When a research goes mechanical, it definitely goes technical. Mechanical engineering project topics are practical project topics; that is to say that, apart from just choosing the research topics and having it approved for research a lot of things has to be put in place. One of the essential procedures in mechanical engineering research is project topic defense. Defending a project topic in mechanical engineering and getting a green flag marks the beginning the research. Choosing a project topic in mechanical engineering requires that you consider the problem you want to solve, the solution you want to bring, the technical know-how needed to establish the change as well as the reach of such solution when actually implemented.

Filters: Undergraduate (HND,BSc,BTech) Masters (MSc,MTech) PhD Thesis

LIST OF MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS
S/N	Project Topic
1	CONSTRUCTION OF A DOUBLE BUNK BED ABSTRACT This project is based on the construction of a double bunk bed which will serve a great place for resting and sleeping. It is done with available local materials which are affordable to an average person. It is also detachable in order that it can be easily transported from one place to another. It was constructed using a (pure black) square pipe of 2 by 1 with dimension of 47mm by 25mm, ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
2	MODIFICATION OF A MOTORIZED MAIZE SHELLER TABLE OF CONTENTS Title page i Declaration ii Approval iii Dedication iv Acknowledgements v Table of Contents vi Abstract vii CHAPTER ONE 1.0 Background of the work 1 1.1 Introduction 1 1.2 Statement of the Problem 2 1.3 Aim and Objectives 3 1.4 Significance of the Project 3 1.5 Scope and Limitation 4 CHAPTER TWO 2.0 Literature Review 5 2.1 Principle of Shelling Maize 8 2.1.1 The rotary impact pri... Continue Reading » Item Type & Format: Project Material - Ms Word \| 33 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
3	STABILITY STUDIES OF SEMI –SUBMERSIBLE BODY IN LAMINAR AND TURBULENT FLOW ENVIRONMENT TABLE OF CONTENT Title Page CHAPTER ONE: INTRODUCTION 1.1 Background of Study 1 1.2 Statement of Problem 3 1.3 Objectives of Study 4 1.4 Scope and Limitation of Study 4 1.5 Significance of Study 5 CHAPTER TWO: LITERATURE REVIEW 2.1 Semi Submersible Bodies 6 2.2 Advantages of Semi submersibles 6 2.3 Disadvantages of Semi submersibles 7 2.4 Types of Semi Submersibles 7 2.4.1 Tourist semi submersible... Continue Reading » Item Type & Format: Project Material - Ms Word \| 71 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
4	MULTIDISCIPLINARY DESIGN OPTIMIZATION OF AN AIRCRAFT WING (AERODYNAMICS & STRUCTURAL) ABSTRACT The quest to operate at the cutting edge of technology is a worthwhile effort but requires intensive research and brilliant implementation of logical thoughts aimed at an achievable objective. This gives distinct results with excellent achievements and impeccable brilliance in technology. This applies to optimization and multidisciplinary design optimization in engineering designs. The ob... Continue Reading » Item Type & Format: Project Material - Ms Word \| 98 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
5	INHIBITION EVALUATION OF CHEMICAL AND PLANT EXTRACTS ON THE CORROSION OF METALLIC ALLOYS IN ACIDIC ENVIRONMENT ABSTRACT Numerous failures and eventual losses in the chemical industry have been traced to corrosion processes. Failures resulting from the inability of metals to support designed load requirements because of losses imposed by corrosion effects can be combated economically through the use of chemical inhibitors. Despite the fact that synthetic inhibitors are effective, nonetheless they are associ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 242 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
6	MANUFACTURING SYSTEM OPTIMIZATION: A STUDY OF UNITY AND EFFICIENCY IN PRODUCTION (UEP) IN PEUGEOT AUTOMOBILE NIGERIA (PAN) ABSTRACTTheaim of this study is to investigate why the implementation of Unity and Efficiency in Production(UEP)is not yielding the expected results in PAN. The overall operations, production and sales are still on the low trend.This survey examined how the adaptation of UEP tools and the level of functions integration relate to the overall implementation success.A well structured questionnaire di... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
7	CONSTRUCTION OF A STEEL BOOK SHELF ABSTRACT The bookshelf had been successfully constructed. It was initiated so as to address the poor keeping of students’ files in various offices and laboratories. Locally available materials like angle iron and sheet metals were used in the construction. The book shelf can easily be moved from one place to another, and also books or files can be arranged for easy identifications. The test ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
8	DEVELOPMENT OF A TRAY DRYER ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
9	REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING ABSTRACTMechanical Engineering Department of the Institute of Management and Technology has many non " functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the Deep Freezer under review.Quality and effectiveness of machine maintenance were observed. A minimized cost of maintenance and high Technology of repair were also adopted.In othe... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
10	DESIGN AND FABRICATION A CORN SHELLING MACHINE CHAPTER ONE INTRODUCTION The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for efficiency and realiability. First a corn shelling exercise is a function which could either be manually, mechanically or electro mechanically operated with the simple objective of shelling out th... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
11	STRATEGIES FOR IMPROVING STUDENTS’ PERFORMANCE IN WELDING AND FABRICATION TECHNOLOGY IN TECHNICAL COLLEGES OF KADUNA STATE TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgement v Table of contents vi Abstract viii CHAPTER ONE: INTRODUCTION Background of the Study 1 Statement of the Problem 9 Purpose of the Study 10 Significance of the Study 10 Research Questions 11 Scope of the study 11 CHAPTER TWO: LITERATURE REVIEW Meaning and concept of technical education 13 Importance of te... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
12	APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOMOBILE TECHNOLOGY IN TECHNICAL COLLEGES, KANO (A CASE STUDY OF SOME SELECTED S... TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgment v Table of contents vi Abstract ix CHAPTER ONE: INTRODUCTION Background of the study 1 Statement of the problem 5 Purpose of the study 7 Significance of the study 7 Research questions 8 Scope of the study 9 Limitation of the study 9 CHAPTER TWO: REVIEW OF RELATED LITERATURE Concept of Instructional Materia... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
13	DESIGN AND FABRICATION OF A PAN GRANULATING MACHINE ABSTRACT The pan typed granulating machine is a modern machine designed for producing granular fertilizer. It is essentially made up of a granulating pan, rigid frame, a speed reduction gear, bearing housing and electric motor which produces the drive. The granulating machine gives detailed technical criteria on materials selection, design methodology and assembling of parts. Operational performan... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
14	DESIGN AND CONSTRUCTION OF AN EXTERNAL CALIPER CONSTRUCTION OF AN EXTERNAL CALIPER Table of contents Title page Chapter one Introduction Background CHAPTER TWO: LITERATURE REVIEW CHAPTER THREE: METHODOLOGY CHAPTER THREE: METHODOLOGY STRATEGY CHAPTER FOUR : RESULT AND APPLICATION CHAPTER FIVE: CONCLUSIONS AND RECOMMENDATIONS CHAPTER ONE Background of the study A caliper (British spelling also calliper, or in plurale tantum sense a pair of calip... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
15	MODELING AND EVALUATION OF A PASSIVE FLAT-PLATE SOLAR COLLECTOR ABSTRACT Background: Maternal mortality is an enormous public health burden in developing countries of the world. Birth preparedness and emergency readiness is the process of planning for safe delivery and anticipating the actions needed in case of emergencies. When a woman is adequately prepared for normal childbirth and possible complications, she is more likely to access the skilled and prompt ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 157 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
16	SKILL IMPROVEMENT NEEDS OF METAL WORK TECHNOLOGY TEACHERS IN TECHNICAL COLLEGES IN KADUNA STATE TABLE OF CONTENTS Title page i Approval page ii Declaration iii Acknowledgement iv Table of contents v Abstract vi CHAPTER ONE: INTRODUCTION Background of the study 1 Statement of the problem 2 Purpose of the study 2 Significance of the study 3 Research questions 3 Scope and delimitation of the study 4 CHAPTER TWO: REVIEW OF RELATED LITERATURE Conceptual framework 5 Concept of skills 7 Metal Work ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
17	THE IMPACT OF JET APPARATUS ABSTRACTThis project is focused on experimental analysis of impact of water jet on vanes. This work intends to predict the output of a pelton wheel, and to determine its optimum rotational speed. Hence this work explains how the deflection of the jet generates a force on the buckets, and how the force is related to the rate of momentum flow in the jet. In this experiment, we measure the force gene... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
18	DESIGN AND FABRICATION OF WOOD LATHE MACHINE CHAPTER ONE 1.0 INTRODUCTION The wood lathe machine is introduced to lessen the human suffering and to improve economical and technological standard, and for years now Nigeria recognized that she was economically and technological poor and has been economically dependents on the western world for survival in terms of technology. To dis encourge this importation of technological equipment placed em... Continue Reading » Item Type & Format: Project Material - Ms Word \| 49 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
19	DESIGN AND FABRICATION OF A DUST EXTRACTOR ABSTRACTMan’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways.The environmental degration is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not having them th... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
20	DESIGN AND FABRICATION OF A METAL BOOKSHELF ABSTRACTKnowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive. This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation. There could only be done by stacking books systematically on a book rack where by it can... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT

Pages:

Cannot find your topic?.. Search for the Project Topic now. It saves time and it is easy

Download Mechanical Engineering Final Year Research Project Topics - Free Project Topics | Codemint and Research Materials. Get Complete Chapter 1-5 Project Materials and Research Topics for HND, BSc, MSc in Doc & PDF. Final Year Projects and Research Materials on CodeMint

Disclaimer: You can Browse, Read and Download any of the Mechanical Engineering Project Topics and Research Materials published here for academic research purposes ONLY, such as guidelines, frameworks, related works or as references for your research work. We don't support any form of plagarism. For no reason should you copy word for word. You these research materials for commercial purposes. You are fully responsible for how you use any information found on this website.

LIST OF MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS
S/N	Project Topic
1	CONSTRUCTION OF A DOUBLE BUNK BED ABSTRACT This project is based on the construction of a double bunk bed which will serve a great place for resting and sleeping. It is done with available local materials which are affordable to an average person. It is also detachable in order that it can be easily transported from one place to another. It was constructed using a (pure black) square pipe of 2 by 1 with dimension of 47mm by 25mm, ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
2	MODIFICATION OF A MOTORIZED MAIZE SHELLER TABLE OF CONTENTS Title page i Declaration ii Approval iii Dedication iv Acknowledgements v Table of Contents vi Abstract vii CHAPTER ONE 1.0 Background of the work 1 1.1 Introduction 1 1.2 Statement of the Problem 2 1.3 Aim and Objectives 3 1.4 Significance of the Project 3 1.5 Scope and Limitation 4 CHAPTER TWO 2.0 Literature Review 5 2.1 Principle of Shelling Maize 8 2.1.1 The rotary impact pri... Continue Reading » Item Type & Format: Project Material - Ms Word \| 33 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
3	STABILITY STUDIES OF SEMI –SUBMERSIBLE BODY IN LAMINAR AND TURBULENT FLOW ENVIRONMENT TABLE OF CONTENT Title Page CHAPTER ONE: INTRODUCTION 1.1 Background of Study 1 1.2 Statement of Problem 3 1.3 Objectives of Study 4 1.4 Scope and Limitation of Study 4 1.5 Significance of Study 5 CHAPTER TWO: LITERATURE REVIEW 2.1 Semi Submersible Bodies 6 2.2 Advantages of Semi submersibles 6 2.3 Disadvantages of Semi submersibles 7 2.4 Types of Semi Submersibles 7 2.4.1 Tourist semi submersible... Continue Reading » Item Type & Format: Project Material - Ms Word \| 71 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
4	MULTIDISCIPLINARY DESIGN OPTIMIZATION OF AN AIRCRAFT WING (AERODYNAMICS & STRUCTURAL) ABSTRACT The quest to operate at the cutting edge of technology is a worthwhile effort but requires intensive research and brilliant implementation of logical thoughts aimed at an achievable objective. This gives distinct results with excellent achievements and impeccable brilliance in technology. This applies to optimization and multidisciplinary design optimization in engineering designs. The ob... Continue Reading » Item Type & Format: Project Material - Ms Word \| 98 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
5	INHIBITION EVALUATION OF CHEMICAL AND PLANT EXTRACTS ON THE CORROSION OF METALLIC ALLOYS IN ACIDIC ENVIRONMENT ABSTRACT Numerous failures and eventual losses in the chemical industry have been traced to corrosion processes. Failures resulting from the inability of metals to support designed load requirements because of losses imposed by corrosion effects can be combated economically through the use of chemical inhibitors. Despite the fact that synthetic inhibitors are effective, nonetheless they are associ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 242 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
6	MANUFACTURING SYSTEM OPTIMIZATION: A STUDY OF UNITY AND EFFICIENCY IN PRODUCTION (UEP) IN PEUGEOT AUTOMOBILE NIGERIA (PAN) ABSTRACTTheaim of this study is to investigate why the implementation of Unity and Efficiency in Production(UEP)is not yielding the expected results in PAN. The overall operations, production and sales are still on the low trend.This survey examined how the adaptation of UEP tools and the level of functions integration relate to the overall implementation success.A well structured questionnaire di... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
7	CONSTRUCTION OF A STEEL BOOK SHELF ABSTRACT The bookshelf had been successfully constructed. It was initiated so as to address the poor keeping of students’ files in various offices and laboratories. Locally available materials like angle iron and sheet metals were used in the construction. The book shelf can easily be moved from one place to another, and also books or files can be arranged for easy identifications. The test ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
8	DEVELOPMENT OF A TRAY DRYER ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
9	REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING ABSTRACTMechanical Engineering Department of the Institute of Management and Technology has many non " functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the Deep Freezer under review.Quality and effectiveness of machine maintenance were observed. A minimized cost of maintenance and high Technology of repair were also adopted.In othe... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
10	DESIGN AND FABRICATION A CORN SHELLING MACHINE CHAPTER ONE INTRODUCTION The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for efficiency and realiability. First a corn shelling exercise is a function which could either be manually, mechanically or electro mechanically operated with the simple objective of shelling out th... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
11	STRATEGIES FOR IMPROVING STUDENTS’ PERFORMANCE IN WELDING AND FABRICATION TECHNOLOGY IN TECHNICAL COLLEGES OF KADUNA STATE TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgement v Table of contents vi Abstract viii CHAPTER ONE: INTRODUCTION Background of the Study 1 Statement of the Problem 9 Purpose of the Study 10 Significance of the Study 10 Research Questions 11 Scope of the study 11 CHAPTER TWO: LITERATURE REVIEW Meaning and concept of technical education 13 Importance of te... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
12	APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOMOBILE TECHNOLOGY IN TECHNICAL COLLEGES, KANO (A CASE STUDY OF SOME SELECTED S... TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgment v Table of contents vi Abstract ix CHAPTER ONE: INTRODUCTION Background of the study 1 Statement of the problem 5 Purpose of the study 7 Significance of the study 7 Research questions 8 Scope of the study 9 Limitation of the study 9 CHAPTER TWO: REVIEW OF RELATED LITERATURE Concept of Instructional Materia... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
13	DESIGN AND FABRICATION OF A PAN GRANULATING MACHINE ABSTRACT The pan typed granulating machine is a modern machine designed for producing granular fertilizer. It is essentially made up of a granulating pan, rigid frame, a speed reduction gear, bearing housing and electric motor which produces the drive. The granulating machine gives detailed technical criteria on materials selection, design methodology and assembling of parts. Operational performan... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
14	DESIGN AND CONSTRUCTION OF AN EXTERNAL CALIPER CONSTRUCTION OF AN EXTERNAL CALIPER Table of contents Title page Chapter one Introduction Background CHAPTER TWO: LITERATURE REVIEW CHAPTER THREE: METHODOLOGY CHAPTER THREE: METHODOLOGY STRATEGY CHAPTER FOUR : RESULT AND APPLICATION CHAPTER FIVE: CONCLUSIONS AND RECOMMENDATIONS CHAPTER ONE Background of the study A caliper (British spelling also calliper, or in plurale tantum sense a pair of calip... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
15	MODELING AND EVALUATION OF A PASSIVE FLAT-PLATE SOLAR COLLECTOR ABSTRACT Background: Maternal mortality is an enormous public health burden in developing countries of the world. Birth preparedness and emergency readiness is the process of planning for safe delivery and anticipating the actions needed in case of emergencies. When a woman is adequately prepared for normal childbirth and possible complications, she is more likely to access the skilled and prompt ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 157 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
16	SKILL IMPROVEMENT NEEDS OF METAL WORK TECHNOLOGY TEACHERS IN TECHNICAL COLLEGES IN KADUNA STATE TABLE OF CONTENTS Title page i Approval page ii Declaration iii Acknowledgement iv Table of contents v Abstract vi CHAPTER ONE: INTRODUCTION Background of the study 1 Statement of the problem 2 Purpose of the study 2 Significance of the study 3 Research questions 3 Scope and delimitation of the study 4 CHAPTER TWO: REVIEW OF RELATED LITERATURE Conceptual framework 5 Concept of skills 7 Metal Work ... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
17	THE IMPACT OF JET APPARATUS ABSTRACTThis project is focused on experimental analysis of impact of water jet on vanes. This work intends to predict the output of a pelton wheel, and to determine its optimum rotational speed. Hence this work explains how the deflection of the jet generates a force on the buckets, and how the force is related to the rate of momentum flow in the jet. In this experiment, we measure the force gene... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
18	DESIGN AND FABRICATION OF WOOD LATHE MACHINE CHAPTER ONE 1.0 INTRODUCTION The wood lathe machine is introduced to lessen the human suffering and to improve economical and technological standard, and for years now Nigeria recognized that she was economically and technological poor and has been economically dependents on the western world for survival in terms of technology. To dis encourge this importation of technological equipment placed em... Continue Reading » Item Type & Format: Project Material - Ms Word \| 49 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
19	DESIGN AND FABRICATION OF A DUST EXTRACTOR ABSTRACTMan’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways.The environmental degration is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not having them th... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT
20	DESIGN AND FABRICATION OF A METAL BOOKSHELF ABSTRACTKnowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive. This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation. There could only be done by stacking books systematically on a book rack where by it can... Continue Reading » Item Type & Format: Project Material - Ms Word \| 52 pages \| Instant Download \| Chapter 1-5 \| MECHANICAL ENGINEERING DEPARTMENT

Mechanical Engineering Final Year Project Research Topics

Quick Project Topic Search

CONSTRUCTION OF A DOUBLE BUNK BED

MODIFICATION OF A MOTORIZED MAIZE SHELLER

STABILITY STUDIES OF SEMI –SUBMERSIBLE BODY IN LAMINAR AND TURBULENT FLOW ENVIRONMENT

MULTIDISCIPLINARY DESIGN OPTIMIZATION OF AN AIRCRAFT WING (AERODYNAMICS & STRUCTURAL)

INHIBITION EVALUATION OF CHEMICAL AND PLANT EXTRACTS ON THE CORROSION OF METALLIC ALLOYS IN ACIDIC ENVIRONMENT

MANUFACTURING SYSTEM OPTIMIZATION: A STUDY OF UNITY AND EFFICIENCY IN PRODUCTION (UEP) IN PEUGEOT AUTOMOBILE NIGERIA (PAN)

CONSTRUCTION OF A STEEL BOOK SHELF

DEVELOPMENT OF A TRAY DRYER

REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING

DESIGN AND FABRICATION A CORN SHELLING MACHINE

STRATEGIES FOR IMPROVING STUDENTS’ PERFORMANCE IN WELDING AND FABRICATION TECHNOLOGY IN TECHNICAL COLLEGES OF KADUNA STATE

APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOMOBILE TECHNOLOGY IN TECHNICAL COLLEGES, KANO (A CASE STUDY OF SOME SELECTED S...

DESIGN AND FABRICATION OF A PAN GRANULATING MACHINE

DESIGN AND CONSTRUCTION OF AN EXTERNAL CALIPER

MODELING AND EVALUATION OF A PASSIVE FLAT-PLATE SOLAR COLLECTOR

SKILL IMPROVEMENT NEEDS OF METAL WORK TECHNOLOGY TEACHERS IN TECHNICAL COLLEGES IN KADUNA STATE

THE IMPACT OF JET APPARATUS

DESIGN AND FABRICATION OF WOOD LATHE MACHINE

DESIGN AND FABRICATION OF A DUST EXTRACTOR

DESIGN AND FABRICATION OF A METAL BOOKSHELF

Cannot find your topic?.. Search for the Project Topic now. It saves time and it is easy

Quick Project Topic Search

Find Your Department Here