- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
Furniture refers to movable objects intended to support various human activities such as sitting for chairs, Stools and Sofas, eating and reading for tables and sleeping for beds. A desk or bureau is a piece of furniture with a flat table-style work surface used in a school, office, home or the like for a academic, professional or domestic activities such as reading, writing or using equipment such as a compute. Lack of good tables in offices make academic activities different and slow, hence a conventional office table of 4FT width and 2FT depth 20 inches high knee space under the table, with three drawers was constructed. The construction was carried out for comfort ability, relaxation and also Gesthetic look. The table made of metal frame, medium density fibre wood (MDF), Steel rails, handles, screw and edge tape. The tables have three drawers which are made separate from the main table.
TABLE OF CONTENT
Cover page - - - - - - - - - -
Title page - - - - - - - - - - i
Declaration - - - - - - - - - - ii
Approval page - - - - - - - - - iii
Dedication - - - - - - - - - - iv
Acknowledgment - - - - - - - - - v
Abstract - - - - - - - - - - vi
Table of content - - - - - - - - - vii
CHAPTER ONE
1.0 Introduction - - - - - - - -
1.1 Background of the Work - - - - - - -
1.2 Statement of the Problem - - - - - - -
1.3 Aim and Objectives - - - - - - -
1.4 Scope and Limitation - - - - - - - -
1.5 Significance of the Work - - - - - - -
1.6 Contribution to Knowledge - - - - - - -
CHAPTER TWO
2.0 Literature Review - - - - - - - -
2.1 History of a Table - - - - - - - -
2.2 Concept of Office Table - - - - - - -
Types / Categories - - - - - - - - -
2.3 Portable Office Table with Drawers - - - - - -
2.4 Portable Office Table without Drawer - - - - -
2.5 Application of table - - - - - - - -
CHAPTER THREE
3.0 Methodology - - - - - - - - -
3.1 Construction of the Office Table - - - - - -
3.2 Materials Selection - - - - - - - -
3.3 Unit Members for the Construction of the Table - - -
3.4 Designed Analysis and Calculations - - - - -
CHAPTER FOUR
4.0 Cost Analysis for the Table - - - - - -
4.1 Material Cost - -- - - - - - -
4.2 Labour Cost - - - - - - - - -
4.3 Overhand Cost - - - - - - - -
CHAPTER FIVE
5.0 Conclusion and Recommendation - - - - -
5.1. Conclusion - - - - - - - - -
5.2 Recommendation - - - - - - - -
Reference - - - - - - - - -
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE WORK
A table is piece of furniture with a flat top and one or more legs, providing a level surface for eating, writing or working at. A furniture refers to movable objects intended to support various human activities such as sittings e.g chairs, for sleeping e.g bed. Furniture is also use to hold object at a convenient height for work or to sort things e.g cupboards and shelves. A table is an important factor in our health it enhance our performance in workplace, considering the staff offices, they spend most of their time working using the table for easy writing and documentation. Lack of table in the office affects the activities of the office and health, it result into hard situation as poor office table lead to more inappropriate muscles activities the reason for this research is to solve the problem of load table that will ease the problem of bad writing and documentation will be easier
1.2 STATEMENT OF THE PROBLEM
To minimize missing and damaging of documents and to store document neatly and safely for future use
To correct the case of bad writing postures the problem observed is that the staff office table some are very bad and are not made of modern wood like the medium density fibre wood ( MDF), and some are without drawers for storage of documents.
1.3 AIM AND OBJECTIVES
The aim of the project is to construct a office table comfortable for easy reading, writing and documentation to enhance academic activities the aim will be achieve through the following objectives
ü Carry out design analysis and calculations
ü Construct the table to the conventional standard
1.4 SCOPE AND LIMITATION
This project is limited to construction of table for office usage only
1.5 SIGNIFICANCE OF THE WORK
The portable office table was constructed for good provision of writing and reading posture comfortability and relaxation while writing wider space and more drawers to accommodated important documents and the furniture is aesthetic in nature
1.6 CONTRIBUTION TO KNOWLEDGE
As an engineering student practicing what we have learnt in class is essential, the knowledge gotten form the construction process or during the course of project will be effectively put into use. the project work has some major processes in construction of table, this has contribute a lot to my practical knowledge
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. EVALUATION OF THE MECHANICAL PROPERTIES OF POLYPROPYLENE/CALCIUM CARBONATE NANOCOMPOSITE AT VARIOUS CREEP CONDITIONS
» ABSTRACT The mechanical properties of Polypropylene and Polypropylene/Calcium Carbonate nanocomposites were evaluated. Data on the influence of Calciu...Continue Reading »Item Type & Format: Project Material - Ms Word | 89 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOMOBILE TECHNOLOGY IN TECHNICAL COLLEGES, KANO (A CASE STUDY OF SOME SELECTED S...
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgment v Table of contents vi Abstract ix CHAPTER ONE: INTRODUCT...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. DESIGN AND FABRICATION OF A PAN GRANULATING MACHINE
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY Fertilizer in a broad sense include all materials that are added to the soil to supply certain el...Continue Reading »Item Type & Format: Project Material - Ms Word | 48 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. REGRESSION MODEL THAT COULD BE USED TO PREDICT THE REPAIR TIME IN HOURS OF A PEUGEOT CAR
» CHAPTER ONE Introduction 1.0 Introduction Time standards are realistic goals that must be accomplished by operators and technicians. They could be use...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. CONSTRUCTION OF A DOUBLE BUNK BED
» ABSTRACT This project is based on the construction of a double bunk bed which will serve a great place for resting and sleeping. It is done with avail...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. DESIGN AND FABRICATION OF A METAL BOOKSHELF
» ABSTRACTKnowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER FOR DOMESTIC USE
» CHAPTER ONE 1.1INTRODUCTION Flat plate collectors for solar water heat were population in Florida and southern California in the 1920s. Photo type Isr...Continue Reading »Item Type & Format: Project Material - Ms Word | 41 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. MODELING AND EVALUATION OF A PASSIVE FLAT-PLATE SOLAR COLLECTOR
» ABSTRACT Background: Maternal mortality is an enormous public health burden in developing countries of the world. Birth preparedness and emergency rea...Continue Reading »Item Type & Format: Project Material - Ms Word | 157 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. STRATEGIES FOR IMPROVING THE IMPLEMENTATION OF SAFETY PRACTICES IN TECHNICAL WORKSHOP/ LABORATORY IN TECHNICAL COLLEGE MALALI KADUNA
» TABLE OF CONTENTS Title page i Declaration ii Approval page iii Dedication iv Acknowledgement v Table of content vi Abstract ix CHAPTER ONE: INTRODUCT...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
» ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT