- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦4,000
Get the complete project »

ABSTRACT
This project covers the design and fabrication of an office file cabinet. The cabinet is to keep and secure files and document for future record.
With the four drawers, it has a storing capacity of over a thousand files.
Detail design of the cabinet, material selection were carried out. This cabinet is mainly for office use.
CHAPTER ONE
1.0 INTRODUCTION
All over the world today, file and document keeping can not be overemphasized. It has vertically found acceptable place within the market economy in commercial enterprises such as offices, schools and institutions.
The above therefore resisted the invention of a device such as cabinet for security purposes.
A file is a sequence of bites, information or data as a single unit, typically in a file system in paper, on disk or magnetic tapes.
The term is often used in the narrower sense of keeping information/data in such a way that it will be intact for future references/usage.
These are various techniques in which files can be kept.
(a) Diskette (floppy disk)
(b) Hard disk
(c) Scrolls
(d) Papers
(e) Magnetic tapes.
The process which is applicable is aimed at files safety and security for either references or future usage.
In the past different file keeping practices have been invented such as hole, basket, box, Cain, wood etc. But the merits derived from metal cabinet out weights any of the above forementioned inventions. Hence, the design of this metal file cabinet.
1.1 PURPOSE OF THE PROJECT
The purpose of the project are as follows;
(i) To provide the security and safety of files and documents.
(ii) To design a cabinet which will be effective and maintenance free.
(iii) To design a cabinet that is of low cost.
(iv) To improve on the existing design with maximum security value.
1.1.1 OBJECTIVE OF THE PROJECT
A revolutionary design of this cabinet is to have a low rate of file loss with security lock.
1.1.2 SCOPE AND LIMITATION
The design is for office only and not for commercial usage.
1.2 LITERATURE REVIEW
1.2.1 HOLE
Hole was the first method of file keeping. This dated back to the dark ages as soon as the advent of civilization which started inEgypt say in the 15th century.
During those days, it was a known fact that 95% of the world population were illiterate. The 5% acclaimed literate used the scrolls for writing down of information. In order for acted as today’s file, they dugged a hole in the then muddy wall and inserted the scroll only to bring it out when the occasion demanded.
Looking at this primitive way of file keeping, you wonder what happen to the file if the roof of the house is leaking, rodents attacking the scroll or even termite. Since the hole was not moveable, the basket method was introduced.
1.2.2 BASKET
The basket method came in only when the scroll was edged out due to the advent of paper production.
The basket stole the show for some time because everyone can afford to get, since the raw material for its production was locally derived.
Though, the basket better of than the hole only for its being moveable but it was still not a safer means for file keeping as rodents can eat up the information on the file thereby the need for a closed up method.
1.2.3 BOX
In other to secure the file, a box method was invented. The box was either made of wood or tin. The box method was a little bit better than the previous ones earlier mentioned in the sense that it was covered up thereby safe guarding the files inside. This method was in existence till the early seventy’s (70s) when it was discovered that the tin rusted faster as a result spoiled the documents inside since it was not coated before using for construction.
The disadvantages was that it can easily be stole (since it was not big in size), easy damage to files due to rusting and limited space or capacity for more files.
1.2.4 CAIN
The cain method solved the problem of capacity as it was handly made to the size of a normal cabinet or shelve. It came with multiple compactments to accommodate as many files/ document as possible. It’s further advantage is that its free from moisture due to wet floor, from children’s reach as a result of it height but despite all these, it was not still better off as the files were not safe due to the fact that the different compactment does not have a lock. As the day approaches new things began to unfold leading to the construction of a woody file cabinet which can be locked.
1.2.5 WOOD
The wooden method if not of recent was the most used method due to the fact that, it secures the files, gives more space, aesthetically, adds beauty to homes, offices where they are kept. Wooden type grained more accelerates s most furniture’s in today’s home are wooden.
Wooden cabinet longerity is determined by the type of wood used for its construction. Here different types of wood exist ranging from cadar, mahogany to obeche. But despite any type used if the wood is not seasoned, it is still not going to last long. Therefore wood seasoning is simply the process of treating wood in order for its life span to be extended.
Wooden cabinet at times are heavy while some are light depending on the type of wood, used for its construction.
Nevertheless, wooden cabinet is still en-vogue and as such does not in any way, limiting new inventions which metal method of constructing file cabinet belongs.
1.2.6 METAL
In the late 20th century, wooden cabinet began to fade away, in order words lost its acceptance globally as wrought iron construction besieged the market economy and since then, it has been taking the lead. Take for instance, 90% of the furniture used in most fast food and confectionery outlets in our environment are mainly wrought iron works. Therefore, metal file cabinet has gain global acceptance and as such, it has come to stay, not only in this century but probably up to the next century. Its features guarantees the prediction as it more spacious, which can accommodate files in its thousands, secondly, safe guard and secures its contents with the aid of a key and lock.
You either get what you want or your money back. T&C Apply

You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOELECTRICTY TECHNOLOGY IN TECHNICAL COLLEGES IN NIGER STATE
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgement v Table of contents vi Abstract viii CHAPTER ONE: INTROD...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. THE DESIGN AND CONSTRUCTION OF A SPIN DRYER
» ABSTRACTThis work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save c...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. DESIGN AND SIMULATE A MECHANICAL AGITATOR THAT CAN BE USED TO SUPPLEMENT PAINT MIXING WITH STANDARD PLANT FACILITIES
» CHAPTER 1 1.0 INTRODUCTION 1.1 Background to the Work Mixing is the process of thoroughly combining different materials to produce a homogenous produc...Continue Reading »Item Type & Format: Project Material - Ms Word | 105 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER FOR DOMESTIC USE
» CHAPTER ONE 1.1INTRODUCTION Flat plate collectors for solar water heat were population in Florida and southern California in the 1920s. Photo type Isr...Continue Reading »Item Type & Format: Project Material - Ms Word | 41 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. IDENTIFYING AND REPAIRING THE FAULTS(S) OF AN EXISTING SOLAR SECURITY LIGHT IN FRONT MECHANICAL ENGINEERING DEPARTMENT.
» TABLE OF CONTENT Title Page i Declaration ii Approval Page iii Dedication iv Acknowledgement v Table of Content vi List of Table Notations and abbrevi...Continue Reading »Item Type & Format: Project Material - Ms Word | 38 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. FABRICATION OF A FOLDABLE CAMP BED
» CHAPTER ONE 1.0 INTRODUCTION Camp bed is used universally for relaxation, emergency eases such as war and in other several ways, and it is the acknowl...Continue Reading »Item Type & Format: Project Material - Ms Word | 41 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
» ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. THE IMPACT OF JET APPARATUS
» ABSTRACTThis project is focused on experimental analysis of impact of water jet on vanes. This work intends to predict the output of a pelton wheel, a...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOMOBILE TECHNOLOGY IN TECHNICAL COLLEGES, KANO (A CASE STUDY OF SOME SELECTED S...
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgment v Table of contents vi Abstract ix CHAPTER ONE: INTRODUCT...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. INVESTIGATION OF THE EFFECT OF MOULDING SAND (NATURAL & SYNTHETIC) ON CASTING OF FLANGE USING ALUMINIUM
» ABSTRACTThis study tend to investigate the effect of synthetic and natural moulding sand on casting of flange like component. In this study FUTA logo ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT