- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
The fabrication of a set of sieves and shaker was carried out in paliton workshop, Enugu. After a thorough analysis on the suitable materials to be used in fabrication, galvanized steel was chosen due to its advantages over materials of fabrication. The fabrication was carried out in order to analyze the sizes of particles. The component parts of the sets of sieve and their dimensions are as follows:
Height of sieve 5.5cm
Number of sieves 7
Diameter of sieve 13.5cm
Shape of sieve circular
Height of sieve set 44cm
In fabricating this set of sieves, some factors were taken into consideration and they are:
The capacity of the sieve.
The type of mixture that can be filtered in it.
The types of properties and composition of the mixture.
The type of material to be used for fabrication of the sieve and shaker.
The mechanism of the filtration process and also,
The cost, which is the determinant, factor in fabrication of any equipment.
These factors help greatly in the fulfillment of the objective of this project study. And after fabrication the projects were tested and seem to be working very efficiently with a reasonable separation of particle and cut diameter.
Using the above dimensions, the following fabrication procedures were undertaken, layout, cutting, drilling, welding, filling sand papering, washing and painting, drying assembling.
Finally, the set of sieves and shaker were subjected to the process of washing, painting and drying.
CHAPTER ONE
1.0 INTRODUCTION
Generally, all engineering aspects involve fabrication more especially for chemical plants or equipment, which are used for several processes. This fabrication is carried out so as to achieve and put to practice chemical processes with the help of some components for equipment used for the fabrication procedures enables engineers to deal with operations for separating the component of a mixture, which is automatically based on particle size analysis of materials from one particular sieve to another.
Chemical engineering mostly deals with the fabrication of sieve among other fabrication in order to fulfil the theory of separation technique. In separation processes especially particle size analysis is where sieving technique are available.
During the operation of particle size analysis, many types of screen can be involves, which include Grizzy screens, Revolving screens, mechanical shaking screens, vibrating screen, electrically vibrated screens, oscillating screen, Reciprocating screens and Gyratory screens.
As this project involves the fabrication of set of sieves, it therefore requires good layout and easy separation of oversize and undersize in the contacting sieve unit.
Moreover, in the fabrication of set if sieves, we have to bear certain qualities in mind in which the set of sieves will have to portray such as determination of size and shape of the equipment, which contributes to the efficiency of the equipment. Among the above aim, the set of sieves should be considerable in terms of costing and also availability and portability of the set of sieve should be considered.
Above all, the set of sieve is fabricated in such a way that the particle of larger size than that of the sieve will be retained on the sieve while the particle of lower size will pass through the sieve and be collected on and9othet sieve as undersize, which is also separated by that sieve.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. MODELING AND EVALUATION OF A PASSIVE FLAT-PLATE SOLAR COLLECTOR
» ABSTRACT Background: Maternal mortality is an enormous public health burden in developing countries of the world. Birth preparedness and emergency rea...Continue Reading »Item Type & Format: Project Material - Ms Word | 157 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. DESIGN AND CONSTRUCTION OF FUELLESS GENERATOR
» CHAPTER ONE 1.0 INTRODUCTION 1.1 Background of the study The desire and search for knowledge by man has resulted to various changes in his life and hi...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. DESIGN AND CONSTRUCTION OF JOURNAL BEARING DEMONSTRATION RIG
» ABSTRACTThe journal bearing demonstration rig is an apparatus which is used to study how pressure would vary around the section of a journal bearing a...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. INHIBITION EVALUATION OF CHEMICAL AND PLANT EXTRACTS ON THE CORROSION OF METALLIC ALLOYS IN ACIDIC ENVIRONMENT
» ABSTRACT Numerous failures and eventual losses in the chemical industry have been traced to corrosion processes. Failures resulting from the inability...Continue Reading »Item Type & Format: Project Material - Ms Word | 242 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. DESIGN AND FABRICATION OF WOOD LATHE MACHINE
» CHAPTER ONE 1.0 INTRODUCTION The wood lathe machine is introduced to lessen the human suffering and to improve economical and technological standard, ...Continue Reading »Item Type & Format: Project Material - Ms Word | 49 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. EVALUATION OF THE MECHANICAL PROPERTIES OF POLYPROPYLENE/CALCIUM CARBONATE NANOCOMPOSITE AT VARIOUS CREEP CONDITIONS
» ABSTRACT The mechanical properties of Polypropylene and Polypropylene/Calcium Carbonate nanocomposites were evaluated. Data on the influence of Calciu...Continue Reading »Item Type & Format: Project Material - Ms Word | 89 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. DESIGN AND CONSTRUCT AN ENHANCED SUGARCANE JUICE EXTRACTOR MACHINE
» CHAPTER ONE 1.0 Introduction 1.1 Background Sugarcane as it is widely known around the world is a tall perennial crop which produces an un branched st...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. HUMAN IMMUNODEFICIENCY VIRUS (HIV)-BLOOD INTERACTIONS: SURFACE THERMODYNAMICS APPROACH
» ABSTRACT Sequel to the earlier works by Omenyi et al which established the role of surface thermodynamics in various biological processes from the ele...Continue Reading »Item Type & Format: Project Material - Ms Word | 222 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. DEVELOPMENT OF A TRAY DRYER
» ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
» ABSTRACTMechanical Engineering Department of the Institute of Management and Technology has many non " functional machines. This is caused as a result...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT