- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
![Download Code Ready Instant Download Active](https://codemint.net/assets/home/instantdownloadMain.png)
ABSTRACT
Thermal properties refer to characteristics of a material defining the substance and related to temperature dependent. The most important thing in building design is the protection of people who live and work within the environment. The research work identified some common roofing materials used for building design in Nigeria.. The samples include aluminium (coated), Zinc and stone coated. The investigation was done using Ohm‟s law and Frankz Weidman principle. The thermal properties investigated were thermal conductivity, thermal absorptivity, thermal diffusivity, thermal resistivity and specific heat capacity. with the view of establishing their suitability as roofing materials in building design in Nigeria based on climate and weather condition of particular location. the results show that zinc has the highest thermal conductivity, thermal absorptivity, and specific heat capacity and also the lowest thermal diffusivity and thermal resistivity while stone coated material has the least thermal conductivity, absorptivity, and specific heat capacity and also the highest rate of thermal diffusivity, and thermal resistivity Aluminum coated is within the range of both sample, with thermal conductivity, thermal absorptivity, thermal diffusivity, thermal resistivity and specific heat capacity. Thus stone coated material may be recommended for roofing of building where the temperature is high and zinc may be recommended for roofing of buildings where temperature is low. For normal temperature range, Aluminium material may be recommended
You either get what you want or your money back. T&C Apply
![](https://codemint.net/assets/public/img/100-money-back-guarantee.png)
You can find more project topics easily, just search
-
SIMILAR BUILDING TECHNOLOGY FINAL YEAR PROJECT RESEARCH TOPICS
-
1. APPLICATION OF GEOINFORMATIC TECHNIQUES IN CONTROLLING FLOODING IN VULNERABLE ROADS AND BUILDINGS IN NIGERIA
» CHAPTER ONE INTRODUCTION 1.1 Background to the Study The acronym GIS stands for geographic information system, it is a system which allows a capture, ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
2. ASSESSMENT OR CONTROLLING OF DAMPNESS IN EXISTING BUILDING IN NIGERIA
» CHAPTER ONE INTRODUCTION 1.1 Background to the Study A building delivered to the satisfaction of the client is one that is accepted as being of high s...Continue Reading »Item Type & Format: Project Material - Ms Word | 49 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
3. THE EFFECT OF COST OF ROOF ON THE TOTAL COST OF A BUILDING. A CASE STUDY OF SOME SELECTED BUILDINGS IN AWKA SOUTH- ANAMBRA STATE
» ABSTRACT The research looked at the effect of cost of roof on the total cost of a building (A case study of some selected buildings in Awka South, Ana...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
4. PROSPECT OF SUSTAINABLE ENERGY (BIOGAS) GENERATION IN THE UNIVERSITY OF UYO
» ABSTRACT The study explores the potential of biogas generation as an alternative source of energy for the University of Uyo. The research examines the...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
5. THE ROLE OF DRY CONSTRUCTION IN ENSURING AFFORDABLE HOUSES IN NIGERIA
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND TO THE STUDY With Nigeria’s capital expenditure profile put at 24 per cent of recurrent expenditure in 2...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
6. AN ASSESSMENT OF THE INFLUENCE OF COMBUSTION GENERATED POLLUTANTS ON THE INDOOR AIR QUALITY OF SELECTED LABORATORIES IN AHMADU BELLO UNIVERSITY ZARIA
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY Interests in the role of air quality in health and disease date back to antiquity. Hippocrates in his...Continue Reading »Item Type & Format: Project Material - Ms Word | 166 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
7. WETLAND CONSERVATION AND RESTORATION IN THE CITY OF NIGERIA
» CHAPTER ONE INTRODUCTION 1.0 Background to the Study The world and Africa in particular are facing serious challenges in the area of environmental deg...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
8. ACCESSMENT OF THE COMPRESSIVE STRENGTH OF SANDCRETE HOLLOW BLOCKS MOULDED FROM FOUR (4) DIFFERENT BLOCK INDUSTRIES IN IGABI, CHIKUMAND KADUNA SOUTH LO...
» CHAPTER ONE 1.0 Introduction Sandcrete blocks are composit4e material made up of cement, sand and water moulded into different sizes (Barry 1969). It ...Continue Reading »Item Type & Format: Project Material - Ms Word | 51 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
9. MANAGEMENT OF MATERIALS IN BUILDING
» ABSTRACT The control of materials on construction sites is handled carelessly by planning and purchasing departments, site supervisors and engineers a...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT
-
10. MANAGEMENT OF MATERIALS ON BUILDING CONSRTUCTION SITES
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY Material management can be defined as a process that coordinates planning, assessing the requirem...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages |
Instant Download | Chapter 1-5 | BUILDING TECHNOLOGY DEPARTMENT