Get the complete project »
- The Complete Research Material is averagely 50 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦5,000
1.1 Background of the study
Electronic digital display system as used in this reports refers to a sign that uses electronic hardware and software to display its copy, messages or images. Also, a sign utilizing a fixed light source to provide a message in text, images pictures, and / or symbols that may appear to move or may appear as on/off messages. This is contrast to traditional non-electronic signs where the copy displayed is physically applied to the sign surface by printing, painting or otherwise attaching it onto the sign. The materials or substrate to which the copy is applied is typically paper, wood, plastic or the wall of a building.
In this modern time, solid materials have helped man to show that he really exists by doing wonders in the world of electronics. One major development, made possible by the enormous advances in solid state technology, is the “digital revolution”. Circuits are designed to implement the basic digital logic functions fundamental to all digital systems. Digital electronics therefore comprises the design, manufacture and use of circuits for processing information in digital form (Simpson, 1978).
An information display is a way of providing information and it is also used as an object for promotion. It can be seen in a form of cardboard or tarpaulin at stores / shops, sign posts, placards, notice boards and electronic display boards. But the advent of new technologies has made the information in the form of an electronic display in the world of advertisements and promotions (Gupta, Shukla and Nagwekar, 2013). The ability to display a short message can be useful application to be available for any business. Electronic digital display system is perfect for this application. It can be used for both indoor and outdoor which makes it universal fit for any business or event. Electronic digital display system is very efficient and cost effective way to spread messages to thousands of people, without any personal contact or door to door sales. Light-Emitting Diode (LED) is a solid state light source with several attractive properties for display application. LED is a diode that gives off visible light when forward biased (Mehta and Mehta, 2014). It is chosen as the main component for displaying messages because, today LED is the most energy efficiency example and other useful systems.
The birth of signs and display can be said to be as old as the existence of man on the planet earth. From the beginning of the world, different types of displays have been in use, each mode to serve the purpose of invention efficiently. Signs are any kind of visual graphics created to display information to a particular audience (David, 2013). In 1389, King Richard II ofEnglandcompelled landlords to erect signs outside their premises (Manton, 2008). In ancientRome, signboards were usually made from stone or terracotta (Chris, 1995).
With the advancement in technology, man started carving woods and trees. The use of special dyes on wood as a means of identifying special locations. With the discovery of Bronze and iron, man started using the materials to display sign, thus the advent of metal sign boards were born, which are mostly used in developing countries. On semiconductors and vacuum tubes technology, light displays and sign boards were built to add more beauty in the old system and as a way to increase visibility. LED technology is frequently used in signs now instead of Neon signs, introduced in 1910 at the Paris Motor show (Bellu, 2006). The use of electronic is now becoming very important. It is extensively applied in almost our day to day activities.
Electronic digital display system is also used for outdoor advertisement. Before, outdoor advertising was mainly characterized by the use of paper. Every bus stop and billboard had a paper advertisement inside. The reason for this was simple paper was easy to use and extremely cheap. It had some draw backs as well. Before an image is actually on the street, it first has to be printed, pasted and placed. The journey from design to placement is quite long. Another disadvantages is the considerable amount waste generated by the use of paper. Finally, many people ignore a paper advertisement and there attention is drawn to the vibrant environment around them and not to a still image.
The extent of development in information dissemination has made it possible that the well known method of displaying information using sign posts, notice boards, etc has to be modified by using electronic digital display system. In today’s rapidly advancing technology market, most conventional digital display system are not being implemented using individual logic gates and integrated circuits (ICs) such have been used in the past instead, programmable devices such as microprocessor and microcontroller chips which contain the circuitry necessary to create logic functions are being used to implement digital systems. The use of 555 timer as a stable multivibrator and decade counter (CD4017) can be used to build less expensive electronic display system. The use of these two major ICs will bring about less board space, less power consumptions and overall, low cost in manufacturing.
This project however; emphasizes mainly on the display of information using two major integrated circuits (ICs) namely NE555 timer (ICI) and CD4017 (IC2) to control the lighting of LEDs. This message display circuit is built around readily available, low cost components. It is easy to fabricate. A total of 250 LEDs will be used to display the message “GREAT NIGERIAN STUDENTS”
1.2 Statement of the Problem
Due to limitation of the sign board or local sign board which could not display clearly at night expect light shines on it, it is then necessary that electronic display system is employed to counter the limits of the local sign board. The information displayed on the local sign board is less attractive compared to the information displayed using electronic digital display system.
Thus, researchers are prompted to tirelessly hold up to these challenges by initiating some means of improving the above among which is the design and construction of an electronic digital display system.
1.3 Objectives of the Study
The main objective of this study is to design and construct an electronic digital display system. Specifically this study will achieve the following:
i To display “Great Nigerian students”
ii To use the electronic digital display system constructed as a sign post for federal polytechnic, Oko.
iii To have more knowledge on what electronic digital display system is all about.
v To know the benefits of electronic digital display system.
v To design and realize the moving message display panel.
1.4 Significance of the Study
In all field of human endeavour, electronic digital display system plays very vital role, such as means of advertisement, means of communication, presentations, exhibitions, identification and direction. It is also used in giving warning or safety instructions, such as warning signs, traffic signs, exit signs or signs conveying rules and regulations. This project write-up will be a guide to future designing in a related work.
1.5 Scope of the Study
This project covers the use of peripheral solid state electronic components alongside with two major integrated circuits (ICs) namely NESSS timer and CD4017 decade counter to solve above stated problems. It is limited to display GREAT NIGERIAN STUDENTS
1.6 Research Questions
This research will try to provide answers to the following research questions:
1) What is electronic digital display system?
2) How can electronic digital display system be constructed?
3) What are the users of electronic digital display system?
4) What are the benefits of electronic digital display system?
5) What kind of content that can be shown on electronic digital display system?
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
SIMILAR ELECTRICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
1. INSTALLATION A SELF-CONTROL SOLAR STREET LIGHT, CAPABLE OF SWITCHING ON AND OFF AT A SPECIFIC PERIOD OF TIME WITHOUT HUMAN INTERVENTION» CHAPTER ONE INTROUCTION 1.1 BACKGROUND OF STUDY The gradually growing requirement of energy and the limited resource of traditional energy sources has...Continue Reading »
2. DESIGN AND CONSTRUCTION OF AN ELECTRONICS DEVICE THAT CAN BE USED IN MEASURING THE TEMPERATURE AND HUMIDITY OF AN ENVIRONMENTCTION» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY Temperature is a numerical measure of hotness and coldness in a body that is in its own state of inte...Continue Reading »
» CHAPTER ONE INTRODUCTION 1.1 Background of Study Wireless device having electronic properties are able to operate electrical device from a distance is...Continue Reading »
» ABSTRACT The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM SMS technolog...Continue Reading »
5. SKILLS IMPROVEMENT NEEDS OF TEACHERS IN ELECTRICAL INSTALLATION AND MAINTENANCE WORKS IN TECHNICAL COLLEGES IN KADUNA STATE» TABLE OF CONTENTS Title page i Declaration ii Approval page iii Dedication iv Acknowledgement v Table of contents vi Abstract viii CHAPTER ONE: INTROD...Continue Reading »
» CHAPTER ONE INTRODUCTION 1.0 BACKGROUND The project “automatic water level control with an automatic pump control system” is design to mon...Continue Reading »
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF REPORT Motion detector is a two jointed word which are simply motion and detector, all these pairs of words...Continue Reading »
8. ASSESSMENT OF CONSTRAINTS ON HUMAN RESOURCE DEVELOPMENT IN TECHNICAL AND VOCATIONAL EDUCATION IN ANAMBRA STATE» ABSTRACT This study was designed to assess constraints on human resource development (HRD) in Technical vocational education. The study was designed t...Continue Reading »
» CHAPTER ONE INTRODUCTION 1.1 Background to the Study Over the years the use of fossil fuels to generate electricity has not produced enviable results....Continue Reading »
10. DESIGN AND CONSTRUCTION OF A THREE PHASE AUTHOMATIC CHANGE OVER SWITCH WITH GENERATOR STARTER AND CUT-OFF» CHAPTER ONE INTRODUCTION 1.1 Background of the Study Public power supply is a major contributor to economic development in every nation. In developing...Continue Reading »