- The Complete Research Material is averagely 50 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
Chemical and physical methods for the synthesis of magnetic nanoparticles for cancer detection and treatment often involve toxic chemicals, high cost and the formation of non-stable nanoparticles. This prompted the development of fundamental understanding of the synthesis of magnetic nanoparticles, which are biocompatible, cost effective, stable, localized and environmentally friendly in the presence of magnetotactic bacteria.
In this work, fundamental understanding of the underlying mechanisms involved in the formation of magnetic nanoparticles by magnetotactic bacteria are unraveled. Soil dwelling microbes that respond to magnetic pull were cultured in the presence of ferrous salts in a magnetic spirillum growth medium (MSGM). A comparative analysis was made whereby a positive control Magnetospirillum magneticum and an indigenous isolated strain were used in the biosynthesis of magnetic nanoparticles. The dependence of particle shape and size on pH and time, were elucidated using a combination of transmission electron microscopy (TEM) and UV-visible spectrophotometry. The implications of the results are discussed for the development of magnetic nanoparticles for the detection and treatment of cancer.
CHAPTER ONE
1.0 INTRODUCTION
1.1 Background and Motivation
Nanotechnology has provides solutions to some critical problem in the areas of energy generation [1, 2], information storage [3], environmental remediation [4, 5] and biological application [6] to mention but a few. In the recent years, there has been increasing interest in the development of nanoparticles for potential and emerging applications in medicine [7]. These include potential emerging applications in disease detection and treatment [8, 9], biological labelling [10], biosensors [11] and drug delivery [12].
In the case of magnetic nanoparticles (MNPs), there have been significant efforts to develop magnetic nanoparticles for application in cancer detection via magnetic resonance imaging (MRI) [13] and treatment by hyperthamia [14]. In MRI, the current spatial resolution of detection is of the order of a few millimeters [15]. MNPs have been produced largely from Iron, cobalt, iron oxide (Fe3O4) and Fe3CoO4 (Yang et al 2006). Their potential has also been explored for use as contrast enhancement agent during MRI of tumour tissue [16] and localized hyperthamia [14] during cancer treatment. Magnetic nanoparticles have been reported to have the ability of binding to drugs, proteins, enzymes, antibodies, or nucleotides and can be directed to an organ, tissue, cells or tumors using an external magnetic field or can be heated in alternating magnetic fields for use in hyperthermia.
Fe3O4 MNPs are heat-generating nanoparticles which have the ability to convert electromagnetic energy to heat energy. These MNPs have been found to be efficient in the detection and treatment of cancer by MRI and simple radiation therapy. In this case of radiation therapy, energy produced is used to destroy the cancer cells and reduce the size of tumours effectively when a cyclic external magnetic field is applied.
In most cases, there are several physicochemical methods that are used for the synthesis of MNPs. These include: microemulsion, sol-gel synthesis, hydrothermal reactions, flow injection synthesis, electrochemical synthesis, pyrolysis, laser pyrolysis, microwave assisted, carbon arc, combustion synthesis, vapour deposition and chemical co-precipitation method [7, 17]. However these synthesis methods often involve the use of toxic chemicals that can have harmful effects on the environment.
There is therefore a need for environmentally friendly methods for the synthesis of magnetic nanoparticles, that has stimulated the recent interest in the biological synthesis of magnetic nanoparticles from magnetotactic bacteria. There is also a need to understand the underlying mechanisms of magnetic nanoparticle formation in the presence of magnetotactic bacteria. To this end, most work in this field has been done in improving the biocompatibility of the materials, but only a few scientific investigations and developments have been carried out to develop a fundamental understanding of the synthesis of magnetic nanoparticles, which are biocompatible, cost effective, stable, localized and environmentally friendly in the presence of magnetotactic bacteria. The need to understand the underlying mechanisms involved in the formation of magnetite nanoparticles by these bacteria will contribute positively in improving the quality of magnetic particles, their size distribution, their shape and surface under certain preexisting conditions. This would lead to characterizing them to get a protocol for the quality control and commercialization of these particles in cancer detection and treatment.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR SCIENCE & ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. THE IMPACT OF RAILWAY TRANSPORTATION ON TOURISM DEVELOPMENT IN NIGERIA
» CHAPTER ONE INTRODUCTION The role of transportation in the development of tourism has been and continues to be a controversial issue, it is controvers...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
2. CONSTRUCTION OF A LABORATORY MODULE ON KIRCHHOFF'S CURRENT LAW
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE REPORT Gustav Robert Kirchhoff was a German physicist born on March 12 1824 in Konigsberg Prussia; Gust...Continue Reading »Item Type & Format: Project Material - Ms Word | 15 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
3. ASSESSING THE IMPACT OF MODERN TECHNOLOGY ON THE GROWTH OF LITHOGRAHIC PRINTING PRESSES IN KADUNA TOWN
» Abstract Printing industry among others has been affected by technological changes, most especially in the lithographic printing presses. Therefore, t...Continue Reading »Item Type & Format: Project Material - Ms Word | 45 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
4. HEALTH AND SAFETY ON CONSTRUCTION SITE (A Case Study Of Imo State)
» ABSTRACT Building construction sites are most times very hazardous due to the bulk and types of materials and equipment employed towards the realizati...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
5. THE IMPACT OF EFFECTIVE CONTRACT PLANNING ON CONTRACTORS PROFIT (A CASE STUDY OF JULIUS BERGER NIGERIA PLC, ABUJA)
» ABSTRACT Effective contract planning in construction projects is not only crucial to attainment of project objectives but necessary if project failure...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
6. BACTERIAL REMEDIATION OF POLYETHYLENE
» ABSTRACT Improper disposal of commodity plastics e.g. polyethylene (PE) in the environment causes land pollution, soil infertility, is unsightly and p...Continue Reading »Item Type & Format: Project Material - Ms Word | 50 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
7. PRODUCTION AND ADORNMENT OF LEATHER ARTICLES USING LEATHER SCRAPS AND OTHER MATERIALS
» CHAPTER ONE INTRODUCTION 1.1 Background of the Study According to the modified European Directive 75/442 a solid waste is any substance or object in t...Continue Reading »Item Type & Format: Project Material - Ms Word | 105 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
8. A MATHEMATICAL MODEL FOR PREDICTION OF THE STRENGTH OF SANCRETE CEMENT BLOCK [APPLICATION OF HENRY SCHEFFE’S AND OSADEBE’S CONCRETE OPTIMISATION ...
» Abstract Sandcrete blocks are prismatic units manufactured from lean (sand cement) mortar mixes and are the predominant walling materials used in buil...Continue Reading »Item Type & Format: Project Material - Ms Word | 126 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
9. PRODUCTIVITY AND ECONOMIC EFFICIENCY OF COMPUTER TO PLATE (CTP) SYSTEM
» CHAPTER ONE INTRODUCTION 1.1 Background of the study Printing is a custom manufacturing business. A printer’s success depends on satisfying cust...Continue Reading »Item Type & Format: Project Material - Ms Word | 29 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT
-
10. A COMPARATIVE STUDY OF STUDENTS ACADEMIC CONCEPTS USING JAMB SCORES AND CGPA, (A CASE OF BENUE STATE UNIVERSITY, MAKURDI)
» ABSTRACT This research compare the students’ academic performance using JAMB scores and CGPA in Benue state University Makurdi, and the level at...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | SCIENCE & ENGINEERING DEPARTMENT