- The Complete Research Material is averagely 50 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
With the ever increasing need to optimize production, the accurate understanding of the mechanics of multi-phase flow and its effect on the pressure drop along the oil-well flow string is becoming more pertinent. The efficient design of gas-lift pump, electric submersible pumps, separators, flow strings and other production equipment depends on the accurate prediction of the pressure drop along the flow pipe. Pressure is the energy of the reservoir/well and it is crucial to understand how a change in fluid properties, flow conditions and pipe geometric properties affect this important parameter in the oil and gas industry. Extensive work on this subject has been done by numerous investigators albeit in small diameter pipes. Reliance on the empirical correlations from this investigators has been somewhat misleading in modelling pressure drop in large diameter pipes (usually >100 mm) because of the limitations imposed by the diameter at which they were developed and the range of data and conditions used in deriving them.
In this work, experimental data from the experimental study by Dr. Mukhtar Abdulkadir was used as the data source. The gas velocities, liquid velocities, film fraction, gas and liquid properties and the pipe geometric properties from the above mentioned experiment were used to model the frictional and total pressure drop from six correlations. Results were analyzed and compared with the experimental results.
CHAPTER ONE
INTRODUCTION
1.1 General introduction
Profitable production of oil and gas fields relies on accurate prediction of the multi-phase well
flow. The determination of flowing bottom-hole pressure (BHP) in oil wells is very important
to petroleum engineers. It helps in designing production tubing, determination of artificial lift
requirements and in many other production engineering aspects such as avoiding producing a
well below its bubble point in the sand-face to maintain completion stability around the wellbore (Ahmed, 2011). Well fluids above bubble point pressure exist as a single phase as it is being produced from the reservoir. However, as they navigate their way through the network of interconnected pores in the reservoir to the wellbore, there is a continuous reduction in pressure as overburden stress is gradually reduced. This phenomenon leads to the liberation of the entrained gas. As the single-phase fluid rises in the tubing, a critical point is reached where some of the gases begin to come out of solution along the length of the pipe. In other words, it changes from single-phase flow to multi-phase flow.
This leads to some level of complexity as regards to the identification of the physical properties of the individual phases, the flow pattern, the relative volume occupied by the separate phases inside the pipe, and most importantly the implication of the phase separation on the pressure drop along the well tubing string.
Although most if not all calculations for flow lines in multiphase production systems have been and continue to be based on empirical correlations, there is now a strong tendency to introduce more physically based (so called mechanistic) approaches to supplement if not replace correlations. This is because the latter are well known for their unreliability when applied to systems operating under conditions different to those from which the correlations are derived; such conditions encompass: pressure, temperature, fluid properties and pipe diameter. Furthermore, correlations exist for limited geometrical configurations (i.e. vertical or horizontal pipes) and simple physical phenomena (no mass transfer between phases, constant temperature, etc.). With the advent of more complex production systems involving deviated wells as well as the move to exploit gas condensate resources the production of which will inevitably involve strong mass transfer effects, calculation methods will be required to account for such complexities.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR PETROLEUM ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. NATURAL FLOW AND ARTIFICIAL LIFT FOR A SOLUTION GAS DRIVE RESERVOIR
» ABSTRACT Solution gas drive reservoirs are characterized by rapid and continuous decline of reservoir pressure. This rapid and continuous decline of r...Continue Reading »Item Type & Format: Project Material - Ms Word | 50 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
2. EXTRACTION AND CHARACTERIZATION OF WHITE MUCUNA PRURIENS VAR. UTILIS SEED OIL
» CHAPTER ONE 1.0 PREAMBLE 1.1 INTRODUCTION In our world today, the geometric increase of the population has raised alarming concerns on the food securi...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
3. MODELLING, SIMULATION AND CONTROL OF THE REACTIVE DISTILLATION OF BIODIESEL PRODUCTION
» ABSTRACT In this work, the production of biodiesel via reactive distillation process has been modelled and simulated with the aid of ChemCAD for both ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
4. INVESTIGATION OF THE TRANSPORT PROFILE AND DISPERSION OF ATMOSPHERIC AEROSOL OVER THE COASTAL REGION OF LAGOS
» ABSTRACT This work is based on the application of Cohen Coon and Zeigler Nichols tuning techniques using proportional (P), proportional integral (PI) ...Continue Reading »Item Type & Format: Project Material - Ms Word | 60 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
5. PUMP CAPACITY DETERMINATION FOR TWO-PHASE VERTICAL FLUID FLOW
» CHAPTER ONE INTRODUCTION 1.0 Background of Study In the production system, Pressure drop has been a major issue in the field. These pressure drops cou...Continue Reading »Item Type & Format: Project Material - Ms Word | 62 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
6. ADSORPTION OF COPPER (II) ION FROM AQUEOUS SOLUTION ONTO THERMALLY TREATED EGGSHELL: KINETICS AND EQUILIBRIUM STUDY
» CHAPTER ONE INTRODUCTION 1.1 Background Water is an essential substance for the existence of mankind on earth because of its vital function to man and...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
7. COMPARATIVE ANALYSIS OF VOID FRACTION CORRELATIONS FOR HIGH VISCOSITY OIL DATA IN HORIZONTAL PIPELINE
» 1 INTRODUCTION The oil and gas industry is increasingly looking towards unconventional resources like heavy oil to help satisfy world energy demand as...Continue Reading »Item Type & Format: Project Material - Ms Word | 62 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
8. THE EFFECT OF TEMPERATURE ON HYDROLYSIS OF CELLULOSE (SAW-DUST)
» CHAPTER ONE 1.1 Introduction Cellulose is the name given to a long chain of atoms consisting of carbon, hydrogen and oxygen arranged in a particular m...Continue Reading »Item Type & Format: Project Material - Ms Word | 69 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
9. MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION
» CHAPTER ONE INTRODUCTION 1.1 ORIGIN AND NATURE OF ACTIVATED CARBON Carbon is the fifteenth most abundant element in the earth’s crust and the fo...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT
-
10. DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS IN SOIL SAMPLES AROUND SELECTED ABUAD POWER GENERATORS
» ABSTRACT This work covers the determination of PAHs in soil samples around selected ABUAD power generators. The PAHs in the soil samples where extract...Continue Reading »Item Type & Format: Project Material - Ms Word | 59 pages | Instant Download | Chapter 1-5 | PETROLEUM ENGINEERING DEPARTMENT