- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
Animal bones (cow), clay, feldspar and quartz where used to simulate the production of human teeth. The animal bones also referred to as hydroxyapatite sample was collected from an abattoir in Amansea, Anambra state, Nigeria. It was fired, calcined, crushed and sieved then used as one of the major constituent to fabricate various dental samples. The kankara clay sample was collected from Kastina state while quartz and feldspar were obtained from kogi state. The dental samples were produced by slip casting method using Plaster of Paris (P.O.P) mould. The specimens produced were to be fired at 1200ᵒC and relevant parameters: shrinkage (%), density (g/ml), porosity (%), water absorption (%), strength kg/cm2 and even chemical analysis of product samples were to be determined. Unfortunately, due to the epileptic power supply in Projects’ Development Institute (PRODA), the above targets were not met because for quite some months, no electric supply has lasted beyond one good hour.
INTRODUCTION
Animal bone is a rigid organ that constitutes part of the vertebral skeleton. Animal bone supports and protects the various organs of the body, produce red and white blood cell, store minerals and also enables mobility as well as support for the body.
Bones come in variety of shapes and sizes and they have a complex internal and external structure. They are lightweight yet strong and hard. Bone is an active tissue composed of different types of bone cells e.g. osteblasts are involved in the creation and mineralization of bone, ostecytes and osteclasts are involved in the reabsorption of bone tissue.
Bone consists of living cells embedded in mineralized organic matrix. This matrix consists of organic components mainly collagen-organic referring to materials produced as a result of human body and inorganic components, primary hydroxyapatite and other salts of calcium and phosphate. Above 30% of the cellular part of bone consists of the organic components and 70% of salts.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. REHABILATATION OF HOWARD ROTARY SLASHER
» TABLE OF CONTENT Cover page Title page Declaration page Acknowledgement Abstract Table of content Chapter one Introduction Background of study Stateme...Continue Reading »Item Type & Format: Project Material - Ms Word | 31 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOELECTRICTY TECHNOLOGY IN TECHNICAL COLLEGES IN NIGER STATE
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgement v Table of contents vi Abstract viii CHAPTER ONE: INTROD...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
» ABSTRACTMechanical Engineering Department of the Institute of Management and Technology has many non " functional machines. This is caused as a result...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. THE USE OF WATERMELON SEED AS A COAGULANT IN INDUSTRIAL WASTE WATER TREATMENT (A CASE-STUDY OF NIGERIAN BREWERY, KADUNA)
» Abstract The use of water melon seed in purifying waste water from Nigerian brewery, Kudenden, Kaduna – Nigeria was carried out and its application ...Continue Reading »Item Type & Format: Project Material - Ms Word | 58 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. MODIFICATION OF A MOTORIZED MAIZE SHELLER
» TABLE OF CONTENTS Title page i Declaration ii Approval iii Dedication iv Acknowledgements v Table of Contents vi Abstract vii CHAPTER ONE 1.0 Backgrou...Continue Reading »Item Type & Format: Project Material - Ms Word | 33 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. CONSTRUCTION OF A STEEL BOOK SHELF
» ABSTRACT The bookshelf had been successfully constructed. It was initiated so as to address the poor keeping of students’ files in various offic...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. THE DESIGN AND CONSTRUCTION OF A SPIN DRYER
» ABSTRACTThis work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save c...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. DEVELOPMENT OF A TRAY DRYER
» ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. DESIGN AND FABRICATION OF A METAL BOOKSHELF
» ABSTRACTKnowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. DESIGN AND FABRICATION OF A PAN GRANULATING MACHINE
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY Fertilizer in a broad sense include all materials that are added to the soil to supply certain el...Continue Reading »Item Type & Format: Project Material - Ms Word | 48 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT