- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
PREFACE
Our purpose of embarking on the construction of a project of this type is to present a vivid and understandable fact that if given the necessary supports, that we the youth and Engineers in potentials can move this country forward as regards to technological endeavours.
Such as bird eye-view right from time immemorial has provide that a lot of time and money has been wasted without any reason. Money in the sense that the nation has been spending the hand earned foreign exchange on importation of bench sharing machine from China, India and some parts of the western nations.
Our roadside welding and fabrications technical who control half of the engineering productive capacity of this nation spend a lot of time cutting a plan street of metal with chisel without getting a uniform sharp cut, while some waste their time waiting for power supply to operate their cutting or sharing machine which is electrically powered.
The motive of this project is to reduce time, suffering and material wastage by introducing and representing a modern exposition of a manual operated bench sharing machine through which metal sheets material can easily shear out without much suffering.
Perhaps structural difference may exist between this machine compared to power shearing machine but its working principle is the same. Though the main frame of the machine is formed by welding and filling, other methods such as casting and forging can be use to produce the main frame and also its component parts.
TABLE OF CONTENTS
CHAPTER ONE
Introduction
1.1 Metal shearing (lit review)
CHAPTER TWO
2.1 Component parts of bench shearing machine
(specification of problem)
2.2 Heat treatment of the blade
CHAPTER THREE
3.1 Theory and analysis of problem
3.2 Fabrication of bench shearing machine (sequence of operation
3.3 Strength of component
3.4 Machine mechanisms
CHAPTER FOUR
4.1 Cost analysis
4.2 Test and results
4.3 Maintenance (precautions)
CHAPTER FIVE
5.1 Inference
5.2 Recommendation (observation)
5.3 Conclusion
CHAPTER ONE
INTRODUCTION
The production of bench shearing machines to reduce, alleviate and probably eliminate suffering, time, money, wastage of material and more especially the need for technological break through and self reliance has been a major concern of the federal government.
Metal shearing and shaping has been a tiring problem in the society from time immemorial especially toward our loco-parcatesis. To help eradicate these problem this project write up has delved into simplicities and construction of bench shearing machine that can use to cut upto 3mm sheet of mild steel plate with a treated blade made up of high carbon steel.
The machine is manually operated with a long hurdle known as its effort. The long length of the hurdle helps it to increase its output toward the work piece. The material to be cut must be a low carbon material example mild steel, dead mild steel or aluminum alloys.
Other things discussed in this thesis include the component parts of the bench shearing machine, design and construction (sequence of operation), problems encountered and maintenance of the machine to help he reader get acquainted with the work done.
1.1 METAL SHEARING
LITERATURE REVIEW (LIT REVIEW)
Several countries which has made an impact towards technological break through stated by cutting, shearing, filling and assembling metal parts inform of machine that could produce the desired component that is why a large portion of the training and skills of workshop Engineer is devoted to the shaping of metal and stopping the process at the proper time.
In the workshop, most of the shaping involves shearing of metal sheets, usually the conception of shearing suggest clearing the substance apart with a chisel, know that is not the case, it rather involves the shearing action by the use of snipe for tin sheets.
There are four different types of shearing metal sheets in the work shop this include;
1.02 GULLITONE:
This is a big machine that can cut long ring of length in metal sheet which is normally powered by hydraulic, or mechanical drive (gear system) or by big for less pressure gullitone use in time sheets or paper gullitone.
1.03 BENCH SHEAR
This is a manually operated machine that is usually mounted on a bench or table which produce an average force when the handle is forced downward to shear out metal sheet on its blade.
CHISEL
This is a treated tool made of high carbon steel bar which is sharpened at one and for cutting or shearing of metal sheets with the held of harmmer blow at the other unsharpened end of it.
1.04 TINMAN’S SNIPE (STRAIGHT OR CURVED)
This is a manually operated tool with a pivot closer to its blade chat moves uniformly to each other. This is use in shearing light metal sheet of about 0.1mm to 0.4mm in the template work.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. HUMAN IMMUNODEFICIENCY VIRUS (HIV)-BLOOD INTERACTIONS: SURFACE THERMODYNAMICS APPROACH
» ABSTRACT Sequel to the earlier works by Omenyi et al which established the role of surface thermodynamics in various biological processes from the ele...Continue Reading »Item Type & Format: Project Material - Ms Word | 222 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. DESIGN AND CONSTRUCT AN ENHANCED SUGARCANE JUICE EXTRACTOR MACHINE
» CHAPTER ONE 1.0 Introduction 1.1 Background Sugarcane as it is widely known around the world is a tall perennial crop which produces an un branched st...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. DESIGN AND SIMULATE A MECHANICAL AGITATOR THAT CAN BE USED TO SUPPLEMENT PAINT MIXING WITH STANDARD PLANT FACILITIES
» CHAPTER 1 1.0 INTRODUCTION 1.1 Background to the Work Mixing is the process of thoroughly combining different materials to produce a homogenous produc...Continue Reading »Item Type & Format: Project Material - Ms Word | 105 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. STRATEGIES FOR IMPROVING THE MANAGEMENT OF AUTOMOBILE WORKSHOPS IN TECHNICAL COLLEGES IN NIGER STATE
» Title page i Certification ii Approval page iii Dedication iv Acknowledgement v Table of content vi List of figures x List of tables xi Abstract xii C...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. MODELING AND EVALUATION OF A PASSIVE FLAT-PLATE SOLAR COLLECTOR
» ABSTRACT Background: Maternal mortality is an enormous public health burden in developing countries of the world. Birth preparedness and emergency rea...Continue Reading »Item Type & Format: Project Material - Ms Word | 157 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. THE USE OF WATERMELON SEED AS A COAGULANT IN INDUSTRIAL WASTE WATER TREATMENT (A CASE-STUDY OF NIGERIAN BREWERY, KADUNA)
» Abstract The use of water melon seed in purifying waste water from Nigerian brewery, Kudenden, Kaduna – Nigeria was carried out and its application ...Continue Reading »Item Type & Format: Project Material - Ms Word | 58 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. SKILL IMPROVEMENT NEEDS OF METAL WORK TECHNOLOGY TEACHERS IN TECHNICAL COLLEGES IN KADUNA STATE
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Acknowledgement iv Table of contents v Abstract vi CHAPTER ONE: INTRODUCTION Backgroun...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. STRATEGIES FOR IMPROVING THE IMPLEMENTATION OF SAFETY PRACTICES IN TECHNICAL WORKSHOP/ LABORATORY IN TECHNICAL COLLEGE MALALI KADUNA
» TABLE OF CONTENTS Title page i Declaration ii Approval page iii Dedication iv Acknowledgement v Table of content vi Abstract ix CHAPTER ONE: INTRODUCT...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. CONSTRUCTION OF OFFICE TABLE
» ABSTRACT Furniture refers to movable objects intended to support various human activities such as sitting for chairs, Stools and Sofas, eating and rea...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. A PROJECT ON CONSTRUCTION OF PROPELLER AGITATOR
» ABSTRACT Propeller agitator is a specialized of various types of substances. It consists of three basic components which are the shaft, blade and the ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT