- The Complete Research Material is averagely 56 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
This paper is on the design and fabrication of an electrical motorized bicycle wheelchair. The units of the wheelchair are first constructed before being assembled to form wheelchair. The usage is outlined and the assessment of performance of the machine was carried out based on the wheelchair. The wheelchair is recommended for both inward and outward movements of the disabled. The procedure adopted in writing this project is to achieve the aforementioned purpose. Chapter one deals with the introduction, chapter two deals with literature review, chapter three deals with the material and method, chapter four deals with procedures of fabrication of the wheelchair, chapter five deals with conclusion and recommendation of the project and recognition of needs.
CHAPTER ONE
1.0 INTRODUCTION
This modern day has brought about a high demand for comfort ability. The ease of disability of humans and their helps are so overwhelming. With this comes the choice of designing an electrically operated motorized bicycle wheelchair to meet up with the demand of the users. ‘
An electrical motorized bicycle wheelchair is a wheelchair that is propelled by means of an electric motor rather than manual power.
Motorized bicycle wheelchairs are useful for those unable to propel a manual wheelchair or who may need to use a wheelchair for distance or over terrain which would be fatiguing in a manual wheelchair.
Furthermore, they may also be used not just by people with traditional mobility impairments, but also by people with cardiovascular and fatigue based conditions. Any disabled person with a mobility, fatigue or pain- based impairment issues may find a power chair advantageous in some circumstances. However, existing prescription practices generally means that power chair for such use must be private procured or hired for the occasions.
1.1 AIM AND OBJECTIVES
- To fabricate using available local materials y
- To reduce the labour cost and time spent using manual wheelchair.
- To help in reducing the cost of production of a machine
- Increase productivity
- To encourage indigenous technology
- To help students have a better in sight in order to modify the machine in question
The real need for the fabrication of the electrical motorized bicycle wheelchair is significant in the much delay and time as well as energy wasted in using manual wheelchairs and clutches. Moreover, the cost of importation of electrical motorized bicycle wheelchair is too high for average user.
Moreso, to the use of other wheelchair, the electrical motorized bicycle wheelchair will help to save labour, time and consequently increase the rate of production and crafitsnarfs skill. It is also important to explore the design of machines to improve on the ones already made.
1.2 SCOPE OF THE STUDY
The electrical motorize bicycle wheelchair is produced to solve the problems encountered by disables in their movement from place to place.
Also to fasten the rate at which they move without high labour and of good comfort. `
1.3 LIMITATION
- Unavailability of materials
- Financial constrain
iii. Unsteady power supply
- Unavailability of working tools
1.4 JUSTIFICATION
For the fact that Bicycle wheelchair is electrically motorized, it is justified as a simple machine that every disabled person can use and enjoy for free movement from one place to another comfortably in both indoor and outdoor environment.
1.5 DEFINITION OF SOME PARTS
- Frame: This serves as the skeletal part of the wheelchair to which other parts of the wheelchair are fixed for perfect design.
- The Tyre: This enables the wheelchair to move from place to place,
through its rotary motion.
iii. A.C. Motor: This serves as the engine, that propels motion of the wheelchair with the help of the battery.
- Battery: This provides the adequate current needed for proper functioning of the A.C. motor and other electrical parts.
- Handle: This controls the direction of the bicycle wheelchair at the will of user.
- Hub: This is the central part of a wheel, the spokes are all fixed there and it the base for the tyre movement.
vii. Pulley and V.belt:- The pulley helps to transmit motion of the tyre through the use of the V.belt. The wheelchair has pulley connected to both the motion driving source and driven source with the help of the V.beit connected on it. This belt helps to transmit source (motor) to the driven source (tyres) motion from the driving.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. MODIFICATION OF A MOTORIZED MAIZE SHELLER
» TABLE OF CONTENTS Title page i Declaration ii Approval iii Dedication iv Acknowledgements v Table of Contents vi Abstract vii CHAPTER ONE 1.0 Backgrou...Continue Reading »Item Type & Format: Project Material - Ms Word | 33 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR BOX COOKER
» ABSTRACT A solarbox cooker is a device that converts solar energy into useful heat in a confined space. The solar cooking system which captures and ut...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOMOBILE TECHNOLOGY IN TECHNICAL COLLEGES, KANO (A CASE STUDY OF SOME SELECTED S...
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgment v Table of contents vi Abstract ix CHAPTER ONE: INTRODUCT...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. SKILL IMPROVEMENT NEEDS OF METAL WORK TECHNOLOGY TEACHERS IN TECHNICAL COLLEGES IN KADUNA STATE
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Acknowledgement iv Table of contents v Abstract vi CHAPTER ONE: INTRODUCTION Backgroun...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER
» TABLE OF CONTENT CHAPTER ONE1.1 Introduction 1.2 Manual Digester 1.3 Motorized Digester 1.4 Types of Motorized Digester CHAPTER TWO2.1 Literature Revi...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. DESIGN AND FABRICATION OF AN OFFICE FILE CABINET
» ABSTRACTThis project covers the design and fabrication of an office file cabinet. The cabinet is to keep and secure files and document for future reco...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. DESIGN AND CONSTRUCTION OF AN ELECTRIC PRESSURIZED KEROSENE STOVE
» ...Continue Reading »Item Type & Format: Project Material - Ms Word | 29 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. REHABILATATION OF HOWARD ROTARY SLASHER
» TABLE OF CONTENT Cover page Title page Declaration page Acknowledgement Abstract Table of content Chapter one Introduction Background of study Stateme...Continue Reading »Item Type & Format: Project Material - Ms Word | 31 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. DESIGN AND FABRICATION OF A PAN GRANULATING MACHINE
» ABSTRACT The pan typed granulating machine is a modern machine designed for producing granular fertilizer. It is essentially made up of a granulating ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. MODELING AND EVALUATION OF A PASSIVE FLAT-PLATE SOLAR COLLECTOR
» ABSTRACT Background: Maternal mortality is an enormous public health burden in developing countries of the world. Birth preparedness and emergency rea...Continue Reading »Item Type & Format: Project Material - Ms Word | 157 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT