- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
Children swing plays a unique role in the live and upbringing of a child. It makes children to avoid dangerous games thereby providing them on opportunity for proper relaxation.
The children swing consists of a cost iron metal that is welded with a chain and set that makes children move to and fro in an oscillatory movement, thereby crating joyful sensation to the child as he is in motion
This swing is mostly used in the Nursery, Primary and Post Primary Schools, nowadays, to create on awareness to children, that all work and no play, makes jack a dull boy. Thus, it helps children to reduce their academic tension. However, children swing can also be found in leisure parks or amusement parks. They are basically for relaxation purposes.
TABLE OF CONTENTS
Chapter one
Introduction
1.1 Identification of Needs
Chapter Two
Literature Review
2.1 Review of other Designs
2.2 Significance/Economic Importance of the Design
Chapter Three
Design Solution
3.1 Alternative A
3.2 Alternative B
3.3 Alternative C
3.4 Comparison of alternative and choice
Chapter Four
Design Selection and Analysis
4.1 Material Selected for Alternative A
4.2 Reasons/Analysis for parts of the chosen alternative
Chapter Five
Research analysis
5.1 Design Analysis
Chapter Six
Fabrication of Prototype
6.1 Machining of the Components
6.2 Welding and Filing
6.3 Assembly of Components
Chapter Seven
7.1 Testing of Prototype
7.2 Operators Manual/Maintenance
7.3 Conclusion
Bibliography
List of symbols
List of Illustrations
CHAPTER ONE
1.0 INTRODUCTION
The design and fabrication of children’s swing is an acknowledged and established work. Hence, we are trying to imitate or copy the technology and of possible make new innovations to enhance its efficiency and reduce the cost of production.
The children swing is physically operated and it is found commonly in Nursery, Primary, Post-Primary and recreational/relaxation spots. The main objective of the swing is toe create an atmosphere for children to rock themselves to and fro the seeing. Thereby reducing the tension in classroom and also avoiding ht kid from indulging themselves in other dangerous recreational facilities. However, the swing is meant for infants, teenagers and ever adults.
1.1 IDENTIFICATION OF NEEDS
The children swing is a necessity for any growing child. It is needed to build up a child psychologically and making him mentally alert. It also create opportunity for a casual exercise because as one swing, the muscles in the arms and legs are being exercised simultaneously, thereby making the child to be physically fit. The children swing enables the child to relax his nerves, thus avoiding unnecessary tension in one’s mind
DESIGN SPECIFICATION
This project is limited primarily to the production children swing. However, the specification is not limited in this case. We are expected to improve on the already fabricated design, to ensure that other aspect f the design like its reliability, endurance, efficiency and compatibility is maintained.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. STRATEGIES FOR IMPROVING THE MANAGEMENT OF AUTOMOBILE WORKSHOPS IN TECHNICAL COLLEGES IN NIGER STATE
» Title page i Certification ii Approval page iii Dedication iv Acknowledgement v Table of content vi List of figures x List of tables xi Abstract xii C...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. THE IMPACT OF JET APPARATUS
» ABSTRACTThis project is focused on experimental analysis of impact of water jet on vanes. This work intends to predict the output of a pelton wheel, a...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. DESIGN AND CONSTRUCTION OF AN ELECTRIC PRESSURIZED KEROSENE STOVE
» ...Continue Reading »Item Type & Format: Project Material - Ms Word | 29 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. INVESTIGATION OF THE EFFECT OF MOULDING SAND (NATURAL & SYNTHETIC) ON CASTING OF FLANGE USING ALUMINIUM
» ABSTRACTThis study tend to investigate the effect of synthetic and natural moulding sand on casting of flange like component. In this study FUTA logo ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. THE CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
» ABSTRACTThis write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and phy...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. AUTOMATED FUEL DISPENSION SYSTEM
» CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND OF THE STUDY Over the years, computer has served a vital tool for the prevision of information in business...Continue Reading »Item Type & Format: Project Material - Ms Word | 47 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. DESIGN AND SIMULATE A MECHANICAL AGITATOR THAT CAN BE USED TO SUPPLEMENT PAINT MIXING WITH STANDARD PLANT FACILITIES
» CHAPTER 1 1.0 INTRODUCTION 1.1 Background to the Work Mixing is the process of thoroughly combining different materials to produce a homogenous produc...Continue Reading »Item Type & Format: Project Material - Ms Word | 105 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOMOBILE TECHNOLOGY IN TECHNICAL COLLEGES, KANO (A CASE STUDY OF SOME SELECTED S...
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgment v Table of contents vi Abstract ix CHAPTER ONE: INTRODUCT...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER
» TABLE OF CONTENT CHAPTER ONE1.1 Introduction 1.2 Manual Digester 1.3 Motorized Digester 1.4 Types of Motorized Digester CHAPTER TWO2.1 Literature Revi...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. DESIGN AND FABRICATION OF A PAN GRANULATING MACHINE
» ABSTRACT The pan typed granulating machine is a modern machine designed for producing granular fertilizer. It is essentially made up of a granulating ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT