Get the complete project »
- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦4,000
Fermented plantain flour is a good source of carbohydrate, protein and fat it can be blend different proportion with composite wheat flour to produce an acceptable bread. Sensory evaluation of breads samples revealed that acceptable bread can be produced from wheat: fermented ripe plantain flour up to 30% level of substitution of wheat flour with fermented ripe plantain flour with fermented ripe plantain flour and examination of the bread samples showed that the bread produced from wheat fermented ripe plantain flour can safety be kept for up to four days.
PRODUCTION AND EVALUATION OF BREAD USING BLENDS OF WHEAT AND FERMENTED PLANTAIN FLOURs
Bread is the loaf that results from the baking of dough which is obtained form a mixture of flour, salt, sugar, yeast and water. However, other ingredient like milk, sugar and egg etc may be added. Due to increasing population, urbanization and change in food habits, consumption of leavened bread has increased tremendously in developing countries in recent years (Eggleston, 2005)
It is however relatively expensive being made from wheat which is as a result of climatic reasons does not grow well in the tropics and has to be imported ( Edema, Etal 2004) efforts has been made to promote the use of composite flour in which flour from locally grown crops and high protein seeds replace a portion of wheat for use in bread. Thereby decreasing the demand for imported wheat and producing protein enriches bread ( Giami, etal 2004).
Although wheat flour is the indispensable ingredient in leavened bakery products flours and meals from many other grains are frequently used as ingredients for the purpose of enhancing flavour or colour and improving nutritional aspect ( Samuel, 2004). The predominance of wheat flour for baking of levened breads due to the properties of its elastic gluten protein, which helps in producing a relatively large loaf volume with a regular finely crumb structure.
If the wheat flour used in bread making is to be substituted with flour produced from other crops, they must be milled to acceptable baking quality. However such products cannot compare favourably with wheat flour product and therefore can only be referred to as non- wheat bread or named after their flour sources ( Opara Etal 2005).
1.2 NUTRITIONAL VALUE OF BREAD per 100g
Dietary fiber 7g
Thiamine (Vitamin B1) 0.4mg(35%)
Riboflavin ( Vitamin B2) 0.2mg(17%)
Niacin (Vatamin B3) 4.7mg(31%)
1.3 TYPES OF BREAD
We have two main type of bread
- White Bread: Is made from flour containing only the central core of the grain ( endosperm).
- Brown Bread: Is made with endosperm and 10% brain ( pieces of grain husk separated from flour after milling. It can also refer to white bread with added colouring often caramel colouring) to make it brown e.g. wheat bread .
1.4 INGREDIENT IN BREAD MAKING
Preservations (e.g) calcium propionate)
1.5 COMPOSITION AND CHEMISTRY OF BREAD
1.6.1 FORMULATION AND COMPOSITION.
The proportion of water to flour is the most important measurement in a bread recipe, as it affects texture and crumb the most. Professional baker use a system of percentage known as baker’s percentage in their recipe formulations. They measure ingredients by weight instead of by volume because measurement by weigh is much more accurate and consistent than measurement by volume, especially for the dry ingredients(Edema,2004).
The amount of flour is always stated as 100% and the amounts of the rest of the ingredient are expressed as a percent of that amount by weight. Common table bread contain 75% water. In yeast bread, the higher water percentage result in more Carbon(iv)oxide bubbles and a coarse bread crumb. Calcium propionate is commonly added by commercial bakeries to retard the growth of molds and extend the shelf life of the bread.(Edema,2004)
Flour is a product made from grain that has been grounded to a powdery consistency flour provides the primary structure to the final based bread. Commonly available flour are made from rye, barley, maize and other grains, but wheat flour is meat commonly used for bread. Each of these grains provides the starch and protein need to form bread. The quality of the protein contained in the flour serves as the best indicator of the quality of the bread dough and the finished bread. Wheat flour, in addition to its starch contains there water soluble protein groups ( albumin, globulin, and proteoses) and two water insoluble protein group ( qlutein and qliadin). When flour is mixed with water the water soluble protein dissolve, leaving the qluten and qliadin to form the structure of the resulting bread when relatively dry dough is worked by kneading, or wet dough is allowed to rise for a long time the qlutenin forms strands of long, thin, chainlike molecules, while the shorter qliadin forms bridges between the strands of qlutenin. The resulting networks of strands produce by this two protein are known as qluten Glutein development improves if the dough is allowed to autolyse(Giami,2004).
A simple technique for leavening bread is the use of gas – producing chemicals. There are two common methods. The first is to use baking powder or a self-rising flour that includes baking powder. The second is to include an acidic ingredient such as butter milk and add baking Soda, the reaction of the acid with the soda produces gas.(Bhatty,2003)
Many breads are leavened by yeast. The yeast used for leavening bread is saccaromyces cerevisae, this yeast ferments carbohydrates in the flour including any sugar producing carbon dioxide. Yeast has the advantage of producing uniform, quick and reliable results, because it is obtained from a pure culture.
The rapid expansion of steam produced during baking leavens the bread, which is as simple as it is unpredictable. The best known steam- leavened bread is the popover. Steam – leavening is unpredictable since the steam is not produced until the bread is baked. Steam leavening happens regardless of the rising agents ( baking soda, yeast, baking powder, sour dough, beaten egg white e.t.c).
- The leaveny agent either contains air bubbles or generates carbondioxide.
- The heat vaporizes the water from the inner surface of the bubble within the dough.
- The steam expands and makes the bread rise and this is the main factor in the rise of bread once it has been put in the oven, Co2 generation, on its own, is too small to account for the rise. Heat kills Co2 generation.
Salt rising bread employs a form of bacterial leavening that does not require yeast. Although the leaving action is not always consistent and requires close attention to incubating condition. This bread is making a comeback due to its unique flavour and fine texture.
1.6.6 FAT OR SHORTENINGS
Fat such as butter, Vegetable oils, lard affects the development of gluten in bread by coating and lubricating the individual strands of protein and also helps to hold the structure together. Also fat also serves to tenderize the bread they are used in and also help to keep bread fresh longer after baking
1.6.7 BREAD IMPROVERS:
Are often used in producing commercial breads to reduce the time needed for rising and to improves texture and volume . chemical substance commonly used as bread improver include ascorbic acid, hydro chloride sodium metabisulfate etc.
Is one of the most additives used in production. In addition to enhancing flavour and restricting yeast activities, salt affects the crumb and the overall texture by stabilizing and strengthening the qlutein.
1.6.9 BREAD CRUST:
The bread crust is formed from surface dough during the baking process. It is hardened and browned through the maillard reaction using the sugars and amino acids and the intense heat at the bread surface. The nature of bread crust is different depending on the type of bread and the way it is baked. Commercial bread is baked using jets that direct steam towards the bread to help produce a desirable crust.
1.7 AIMS AND OBJECTIVES
- This work is aimed at the production and evaluation of bread using blends of wheat flour and fermented plantain flour.
- Determination of functional and microbiological properties of wheat – plantain composite flour.
- The acceptability of bread baked from the flours with a view to increasing the level of plantain flour inclusion in wheat – plantain composite flour for bread production as this will lead to higher utilization of plantain thereby reducing post harvest losses.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
SIMILAR FOOD SCIENCE & TECHNOLOGY FINAL YEAR PROJECT RESEARCH TOPICS
» ABSTRACT The study was carried out to produce biscuit. spiced with ginger garlic, turmeric, cinnamon. Biscuit is hard, crisp and dried and baked produ...Continue Reading »
» CHAPTER ONE INTRODUCTION Bread is a staple food prepared from a dough of flour and water usually by baking. It is a good source of good nutrient such ...Continue Reading »
3. ASSESSMENT OF THE CHEMOPREVENTIVE EFFECT OF DIETARY INCLUSION WITH CUCURBITA MAXIMA LEAF ON N-METHYL-N-NITROSOUREA-INDUCED COLON CARCINOGENESIS IN WIS...» ABSTRACT There is growing attention on medicinal plants use as food for cancer inhibiting potential, so that chemo preventive dietary inclusion can be...Continue Reading »
» ABSTRACT The proximate composition and analysis of cucumber and spinach leaves was to assess the nutritional value of cucumber and spinach leaves by a...Continue Reading »
» CHAPTER ONE BACKGROUND OF THE STUDY. Canteen services stated way back in the 18th centaury, food and snacks are served as to the taste of the client. ...Continue Reading »
6. THE PREVALENCE OF GESTATIONAL DIABETICS AMONG PREGNANT WOMEN ATTENDING (Y.D.M.H) YUSUF DAN-TSOHO MEMORIAL HOSPITAL TUDUN WADA, KADUNA STATE» ABSTRACT This project was aimed at assessing the prevalence of Gestational diabetes among pregnant women attending Yusuf Dantsoho Memorial Hospital Tu...Continue Reading »
» CHAPTER ONE INTRODUCTION One of the most pressing problems facing the developing nations is food scarcity. Salami and Popoola, (2007); Kana et al., (2...Continue Reading »
8. IMPACT OF MATERIAL QUALITY CONTROL ON PRODUCTION QUALITY OF SOFT DRINK IN 7UP BOTTLING COMPANY KADUNA» CHAPTER I: Introduction 1.1 Background of the Study Generally business organizations are being establish purposely in order to make profit and the suc...Continue Reading »
9. CHEMICAL COMPOSITION, HEALTH PROMOTING POTENTIALS AND STORAGE PROPERTIES OF BISCUITS SUPPLEMENTED WITH ORANGE PEEL AND PULP FLOURS» ABSTRACT Sweet orange (Citrus sinensis) fruits were washed, peeled manually, the juice extracted and the seeds were removed. The peels and pulps were ...Continue Reading »
» CHAPTER ONE BACKGROUND OF STUDY 1.0 Introduction A drilling fluid, or mud is any fluid that is used in a drilling operation in which that fluid is cir...Continue Reading »