- The Complete Research Material is averagely 76 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
CHAPTER ONE: INTRODUCTION
1.1. Background of the Study
The first car alarm was a primitive contraption that utilized a bell or horn connected to the drive shaft. It was created by an unnamed Nebraska inventor in June 20th, 1920. It utilizes the drive shaft to operate its own bell or horn signal when the car is properly moved. This is just a little talk on a car alarm but not a car touch intruder alarm which is a modern, more advanced, and more reliable type of car alarm.
This car touch sensitive alarm project consist of three NE555 timer IC, the first NE555 was wired as monostable multi-vibrator and the remaining two were wired as tone generator. When the sensor is touch or has contact with human hand perhaps body, IC1 is triggered at its pin 2 and output pin 3 goes high for a time period previously set by the values of R4 (10M) and Q1 (transistor) was bias via R3 and this transistor is in such a way that once it was biased it will supply a negative voltage to tone generator thereby making two NE555 timer which was know as (tone generator) to oscillate to make a bell sound through the buzzer. The tone generators are configured as an astable multi-vibrator whose oscillation frequency can be varied with the help of PR1 and PR2. By adjusting the values of PR1 and PR2, modifications on the tone are possible.
The reset button is used to set or open circuit the system back to its initial stage. The system is powered with 12V power supply voltage.
The first chapter of this project is narrating on the introduction, the concept of the system and also the aims and objective. Chapter two is all about literature review. Chapter three talks about specification and operation of system component. Chapter four is operation of system. Chapter five is about construction, testing and packaging. Chapter six is conclusion, observation, recommendation and References.
1.2 AIM AND OBJECTIVE
The main aim and objective of the design and construction this project is to create a comfort in the minds of vehicle owners or users when their vehicles are parked or stationed anywhere without much fear of car-theft.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR ELECTRICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED LIQUIFIED PETROLEUM GAS LEAKAGE DETECTOR USING GSM MODULE
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY Liquefied petroleum gas (LPG) detection is very important because gas is not only an explosive but al...Continue Reading »Item Type & Format: Project Material - Ms Word | 60 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
2. DETECTION AND CONTROL OF RELAY IF OVERVOLTAGE OCCURS
» CHAPTER ONE INTRODUCTION 1.1 Background of study Over voltage occur in a system when the system voltage rises over 110% of the nominal rated voltage. ...Continue Reading »Item Type & Format: Project Material - Ms Word | 36 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
3. THE DESIGN AND CONSTRUCTION OF A 220 / 12 VOLTS SINGLE PHASE STEP-DOWN TRANSFORMER
» CHAPTER ONE 1:0:0 INTRODUCTION A 220/12volts single phase step down transformer connected to a constructed rectifier is one whose input is 220 volts a...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
4. SOLAR POWER INVERTERS, ANALYSIS AND TEST EVALUATION
» CHAPTER ONE 1.0 INTRODUCTION The quest to satisfy our need for stable power supply in Nigeria has driven most Nigerians into an ardent search for alte...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
5. GSM CONTROL SYSTEM
» CHAPTER ONE INTRODUCTION 1.1 Background of study Has technology transformed humankind into omniscient being? Years back, communication was done throug...Continue Reading »Item Type & Format: Project Material - Ms Word | 62 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
6. INSTALLATION A SELF-CONTROL SOLAR STREET LIGHT, CAPABLE OF SWITCHING ON AND OFF AT A SPECIFIC PERIOD OF TIME WITHOUT HUMAN INTERVENTION
» CHAPTER ONE INTROUCTION 1.1 BACKGROUND OF STUDY The gradually growing requirement of energy and the limited resource of traditional energy sources has...Continue Reading »Item Type & Format: Project Material - Ms Word | 20 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
7. COMPUTER BASED ANALYSIS OF ELECTRICAL POWER SYSTEM FOR THE PURPOSE OF STABILITY STUDIES
» ABSTRACT This report is on stability study in electrical power system. The ability of an electric power system to reestablish the initial state (or on...Continue Reading »Item Type & Format: Project Material - Ms Word | 26 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
8. DESIGN AND CONSTRUCTION OF A CAR TRACKER SYSTEM
» CHAPTER ONE INTRODUCTION 1.1 Concept of Study Over the past years, automobile manufacturers have been integrating all manner of security system, to it...Continue Reading »Item Type & Format: Project Material - Ms Word | 90 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
9. DESIGN AND IMPLEMENTATION OF A SOFTWARE PACKAGE FOR BILLING SYSTEMS OF ELECTRICITY INDUSTRY
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY The Automated Meter Reading (AMR) was started in 1962 by AT&T, but this experiment was not succes...Continue Reading »Item Type & Format: Project Material - Ms Word | 35 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT
-
10. DESIGN AND CONSTRUCTION OF A METAL DETECTOR
» ABSTRACT The project work titled Design and construction of a metal detector. When fully design and implemented would be able to detect any metallic m...Continue Reading »Item Type & Format: Project Material - Ms Word | 50 pages | Instant Download | Chapter 1-5 | ELECTRICAL ENGINEERING DEPARTMENT