Get the complete project »
- The Complete Research Material is averagely 55 pages long and it is in Ms Word Format, it has 1-7 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦4,000
Design and implementation of Computerized record keeping system has become a big task and indeed a burden to many computer programmes, computer operators and even other computer personnel this computer age.
Many companies, business units and other cooperate bodies want their business to be computerized but fin it extremely hard to have a good designer to meet their demand. In recognition and appreciation of the problem and task, that arose the interest of the researchers in carrying out a study on “designing and implementation of computerized business record” using the Nigeria Cement Company (NIGERCEM) Nkalagu Ebonyi as a case study.
In conducting the study, I collected primary data and secondary data which were already documented.
From the analysis and tests carried out, the following findings were made:
1. The cost of production in the company
2. The cost of paying workers salaries
3. The average cost of the produce.
The seeking price of the produce were estimated.
The gain of the company.
The cost of other minor activities encountered in the company.
Furthermore there is less internal control in the company.
Based on these and other finding the researcher recommends the company for establishing effective control. Moreso, the company should maintain regular and safety stock in production.
TABLE OF CONTENTS
Table of Contents
CHAPTER ONE: INTRODUCTION
1.1 Background of the study
1.2 Statement of the problem
1.3 Objective of the study
1.4 Significance of the study
1.5 Research question
1.6 Scope of the study
1.7 Delimitation and limitation
1.8 Definition of terms
CHAPTER TWO: LITERATURE REVIEW
CHAPTER THREE: DESCRIPTION AND ANALYSIS
3.1 Existing System Operation
3.1.2 Organization Structure
3.2 Method of business record keeping
3.3 Population of the study
3.4 Analysis cost of existing system
3.5 Objective of the existing system
3.6 Input of the existing system
3.7 Methods of gathering information
3.8 Problems in the existing system
3.9 Existing system report.
CHAPTER FOUR: DESIGNING OF COMPUTERIZED RECORD SYSTEM
4.2 Design approach
4.3 Output specification and design
4.4 General account sheet (weekly)
4.5 Procedure chart
4.6 System flowchart
4.7 System requirement
CHAPTER FIVE: IMPLEMENTATION OF THE NEW SYSTEM
5.1 Program design
5.2 Flow chart system main menu
5.3 File maintenance sub system flowchart
5.4 Report generation sub system flowchart
5.5 Program flow chart for add
5.6 Program flow chart for deletion
5.7 Change over procedure
5.8 Test run
CHAPTER SIX: SUMMARY, RECOMMENDATION AND CONCLUSION
6.1 Program documentation
6.2 Users documentation
CHAPTER SEVEN: SUMMARY, RECOMMENDATION AND CONCLUSION
1.1 BACKGROUND OF THE STUDY
Computer is a deterministic device ie it uses input data and process to determine the anticipated outputs.
Computer being an electronic machine, which accept data, process, store and retrieve information according to the predetermined program. The device obeys a particular application software manufactured by software companies for accepting, processing, storing and retrieving the post determined output for that particular purpose at that time.
The processes undertaking by the computer may involve retrieving records sorting records, arithmetic calculations and other electronic manipulation processes. Computer displays information, prints information out, produce it in other form according to the instruction (software) given to it at the point of time. The computer undergoing program control, can equally performs arithmetic and logical operation with human intervention.
Computerization which practical application of the knowledge and processes of computer with our process.
The growing of companies and transforming into the information technology (IT) has impetrated the need for designing and implementation of computerized business record keeping for the effective production and management. This idea is more pronounced on the researchers part of Nigeria.
Most business owners produce goods and store them in the warehouse without taking due regard of taking record of them for profit maximization. This is primarily due to poor designing and implementation of the business outfit. Regret ability without prior to the objective and motive of the business, the goods are often deteriorated by reducing its marketable value and even by some unscrupulous and selfish staff of the business outfit.
Computerization of the business record keeping is a remedy to such predicament because it picture out the pre determined output at any point. It is deemed fit. Complex businesses comparing ought to have BUSSLINE DATEBASE. Any time the information about the business is needed by the manager or the appropriate personnel the data base of the business can be called up (retrieved) to give the required need.
Moreso in a designed and implemented business record keeping, loses are saved and profit is maximized.
Manual business record keeping system in succeptable to the left in order to have illegal access to it. This and some scrupulous staff of such organization/business internationally deteriorate the record in order to achieve their selfish gain.
Obviously some big business unit find hard recording their data/paper work and access them at their demand. This is attributed by large volume of paper that may involve in it.
The accuracy and speedy of computer recommends it to organizational control and through effective decision making.
1.2 STATEMENT OF THE PROBLEM
The principal problems associated with Nigeria Cement Company (NIGERCEM) Nkalagu, Ebonyi by this research study are as follows:
i. Inconsistence of purchasing record
ii. Inconsistence of production cost
iii. Inconsistence of sales record
iv. Inconsistence of staff salaries
v. Poor manual database recording
vi. Poor management information system among levels of personnel.
1.2 SUB PROBLEM
(i) Review of the existing system of the Nigeria Cement Company (NIGERCEM) Nkalagu Ebonyi.
(ii) Designing a new record management system for Nigeria Cement Company (NIGERCEM) Nkalagu, Ebonyi.
(iii) Coding the new system using computer programming language.
1.3 OBJECTIVES OF THE STUDY
The principal objectives of the study was to highlight, improve the effectiveness of Nigeria Cement Company (NIGERCEM) Nkalagu, Ebonyi records. Furthermore, the encourage economic growth of our country. The study is expected to place the company at particular standard of the profit maximization for the owners to enjoy the computerized Nigeria Cement Company (NIGERCEM) records.
The study will aimed at bringing out remedies on the past loses during manual database system by helping.
(i) To determined the raw material the company brings.
(ii) To determine the output of the company.
(iii) To identify how the goods are supplied to customers.
(iv) To determine the number of goods in stock.
(v) To determine company’s circulating capital.
(vi) To determine the company’s creditor.
(vii) To determine the company’s debtors
(viii) To determine amount paid to workers of the company.
(ix) To determine the maintenance cost of the company.
(x) To determine the tax levied by government.
(xi) To determine the profit of the company.
1.4 SIGNIFICANCE OF THE STUDY
The search report is expected to help the owner, the management and the entire workers of the Nigeria Cement Company (NIGERCEM) Nkalagu.
It is aimed at bring fact on the problems and thinking factors facing Nigeria Cement Company (NIGERCEM) record keeping in order to make a maximum profit. It is equally expected and believed that the report shall among other thing.
(i) Widen the knowledge of the owner and management of business centre on designing and implementation.
(ii) Enhance the wide employment opportunities for the qualified personnels.
(iii) The report is to serve as point of reference for students in such field of study.
1.5 RESEARCH QUESTION
These structured questions were formulated at the beginning of the report. They are administered as the procedural stops to get all the required information and data involved in the system.
(i) Where in your organizational chart?
(ii) What are the subsystem of the system (NIGERCEM) Nkalagu, Ebonyi?
(iii) What are the names of each subsystem?
(iv) Who is/are the head of each subsystem?
(v) What are the raw materials used for production?
(vi) How many workers work here?
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
SIMILAR COMPUTER SCIENCE FINAL YEAR PROJECT RESEARCH TOPICS
» CHAPTER ONE INTRODUCTION Electronic voting system (EVS) also known as e voting is a term encompassing several different types of voting embracing both...Continue Reading »
2. DESIGN AND IMPLEMENTATION OF A WEB-BASED TRADING SYSTEM (A CASE STUDY OF FEDERAL UNIVERSITY OF TECHNOLOGY, MINNA).» CHAPTER ONE INTRODUCTION 1.0 INTRODUCTION This chapter unfold the impact of Web based Trading System, it background information, the statement of the ...Continue Reading »
3. ANALYSIS OF DATA MINING TECHNIQUES OF TELECOMMUNICATION COMPANIES IN NIGERIA: A CASE STUDY OF MTN NIGERIA» ABSTRACT This study was intended to analyze data mining techniques of telecommunication companies in Nigeria. This study was guided by the following o...Continue Reading »
» CHAPTER ONEINTRODUCTION1.1 HISTORICAL BACKGROUND OF COMPUTERSA computer is an electronic machines which receives data as input processes the data rece...Continue Reading »
5. A DESIGN AND IMPLEMENTATION OF A COMPUTERIZED BIOMETRIC CLOCKING SYSTEM (A CASE STUDY OF FEDERAL UNIVERSITY OF TECHNOLOGY MINNA)» CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND TO THE STUDY This part presents biometrics as the engineering used to measure and dissect individual attri...Continue Reading »
» Abstract This Project Design and Implementation of Orientation Camp Information System (A Case Study of NYSC Orientation Camp Awgu ) was designed to e...Continue Reading »
» CHAPTER ONE 1.1. INTRODUCTION A recruitment management system is a comprehensive tool to manage the entire recruitment processes of an organization. I...Continue Reading »
8. DESIGN AND IMPLEMENTATION 0F AN ONLINE VEHICLE AND PLATE NUMBER REGISTRATION AND IDENTIFICATION SYSTEM IN NIGERIA» CHAPTER ONE 1.0 INTRODUCTIONVehicle Registration in Nigeria began over 100 years ago and the records have been essentially manual which in turn has no...Continue Reading »
9. DESIGN AND IMPLEMENTATION OF A COMPUTERISED PROJECT MANAGEMENT SYSTEM (A CASE STUDY OF SPRINGLIGHT TECHNOLOGY, UYO)» CHAPTER ONEINTRODUCTION1.1.0 GENERAL INTRODUCTION Project management establishments like Springlight Technology, Treasure property& project manage...Continue Reading »
» ABSTRACT This study was intended to evaluate the effect of computer usage on academic performance of students. This study was guided by the following ...Continue Reading »