Undergraduate Agricultural Engineering Final Year Project Research Topics
Agricultural Engineering Project Topic:
Download Agricultural Engineering Final Year Research Project Topics - Free Project Topics | Codemint and Research Materials. Get Complete Chapter 1-5 Project Materials and Research Topics for HND, BSc, MSc in Doc & PDF. Final Year Projects and Research Materials on CodeMint
Filters: Undergraduate (HND,BSc,BTech) Masters (MSc,MTech) PhD Thesis
| LIST OF AGRICULTURAL ENGINEERING UNDERGRADUATE PROJECT TOPICS AND MATERIALS | ||
|---|---|---|
| S/N | Project Topic | |
| 1 |
REHABILITATION OF HOWARD ROTARY SLASHERABSTRACT The Howard rotary slasher was rehabilitated, the oil seal in the gear box at the rotary slasher was replaced. Bolt and nuts were also replaced. Repair and maintenance were carried out on the Howard rotary slasher in such a way that all worn parts, missed part were repaired and replaced at the cost of N31,100 naira only. After rehabilitation, the slasher was tested and its performed good. ... Continue Reading »
Item Type & Format: Project Material - Ms Word |
52 pages |
| |
| 2 |
DEVELOPMENT OF AN INJECTOR NOZZLE TESTER FOR SPARK IGNITION ENGINE.CHAPTER ONE 1.0 Introduction The top of the injector nozzle has a lot of holes to deliver a spray of diesel/petrol fuel into the cylinder. The higher the pressure the smaller the injector nozzles opening can be producing smaller pulse that provide better fuel atomization, the fuel is sprayed through an injector nozzle typically at high pressure to improve the mixing of fuel with air.( Lucas Inject... Continue Reading »
Item Type & Format: Project Material - Ms Word |
48 pages |
| |
| 3 |
CONSTRUCTION OF A COWPEA THRESHER HND PROJECT REPORTABSTRACT A motorized cowpea threshing machine was constructed in this project consists of shaped hopper inclined at an angle of 45 on the concave cover, sieves with 13 mm holes, shaft, bolt bearings, pulleys, thresh out let collecting through, V – belt and a straight bladed cleaning fan to provided the volume of air required. The machine is portable and operated by a 3.73 kw (5 hp) electric ... Continue Reading »
Item Type & Format: Project Material - Ms Word |
42 pages |
| |
| 4 |
REHABILITATION OF THREE BELDING BOTTOM DISC PLOUGHABSTRACT The Rehabilitation of 3 Belding bottom disc plough implement involved was in this project. The bearing for the disc carries, disc, bolts and nut to hold tight the disc plough are faulty, and certain repair maintenance were carried out on the disc plough implement in such a way that the worn out, fault missing part were repaired and replace. The purpose for the rehabilitation of this ploug... Continue Reading »
Item Type & Format: Project Material - Ms Word |
30 pages |
| |
| 5 |
TO INSTALLATION OF AN AUXILIARY WATER SUPPLY NETWORK TO THE TANK AND TO OTHER UNITS IN THE DEPARTMENT FROM THE ALREADY CONSTRUCTED BOREHOLE IN AGRICUL...CHAPTER ONE 1.1 Background of the Study Water is the most essential commodity for the sustenance of life. Water makes everything grow but, there is a saying “water waters everywhere but not a drop to drink”. It emphasises the importance of portable water. Water for human consumption ought to be pure and wholesome. Water plays an important role in human life not only to survive but comf... Continue Reading »
Item Type & Format: Project Material - Ms Word |
26 pages |
| |
| 6 |
SAFETY IN AGRICULTURAL ENGINEERING WORKSHOP, FIELD OPERATIONS AND LABORATORIESABSTRACT Agriculture ranks among the most hazardous industries and includes growing and harvesting crops such as corn, cotton, soybeans, and fruit, as well as livestock, poultry, and other animals to provide products such as beef, chicken eggs, dairy, and wool. Farm workers are at high risk for fatalities and injuries, work related lung diseases, noise induced hearing loss, skin diseases, and cert... Continue Reading »
Item Type & Format: Project Material - Ms Word |
96 pages |
| |
| 7 |
INSTALLATION OF A CROP PROCESSING SIDE LABORATORY IN THE AGRICULTURE AND BIO ENVIRONMENTAL ENGINEERING DEPARTMENTABSTRACT The crop processing side laboratory dealt with in this project ,or involved in this project, was initiated for a long period in this department due to lack of implementation of equipment. The installation of the crop processing side laboratory was carried out by the students to equip the laboratory of agricultural products in any situation or set of condition that is conductive investigat... Continue Reading »
Item Type & Format: Project Material - Ms Word |
39 pages |
| |
| 8 |
POST HARVEST GRAIN LOSS: A MAJOR LOSS TO NATIONAL FOOD SECURITYABSTRACT Grains may be lost in the pre harvest, harvest, and post harvest stages. Pre harvest losses occur before the process of harvesting begins, and may be due to insects, weeds, and rusts. Harvest losses occur between the beginning and completion of harvesting, and are primarily caused by losses due to shattering. Post harvest losses occur between harvest and the moment of human consumption. T... Continue Reading »
Item Type & Format: Project Material - Ms Word |
25 pages |
| |
| 9 |
ASSESSMENT OF LEAD CONTENT VARIATION IN RIVER KADUNA AT NARIYA FARMABSTRACT This study assessed the variations of Lead content in River Kaduna at Nariya farm for the months April, May and June, 18 samples of water were collected and analyzed. The data were analyzed for the three months for lead contents variations using the Flame Atomic Adsorption Spectrophotometer (F AAS) method. Statistical approach was deployed to determine the level of significance of the mon... Continue Reading »
Item Type & Format: Project Material - Ms Word |
52 pages |
| |
| 10 |
DEVELOPMENT AND TESTING OF MANUAL BOOM SPRAYERCHAPTER ONE 1.0 Introduction 1.1 Background of the Study Agricultural spraying may be termed a process of applying chemicals such as fertilizer, herbicides and insecticides to crop or agricultural product to enhance food production and to have maximum protection against weeds and insects which attack the crops. Agricultural chemical have an important role in land management and the production of f... Continue Reading »
Item Type & Format: Project Material - Ms Word |
27 pages |
| |
| 11 |
DEVELOPMENT OF CENTRIFUGAL CLEANING MACHINE FOR FONIO (ACHA)Abstract A centrifugal cleaning machine for fonio (Acha) was developed. The machine consists of four buckets, the bucket holders, the rotor, the shaft, top and bottom plates, frames, bearings and pulleys and a 3h.p electric motor. It was tested using 2kg of fonio (Acha) and powered by the electric motor. The tested result shows that the cleaning efficiency and percentage throughout were 89% and 93... Continue Reading »
Item Type & Format: Project Material - Ms Word |
51 pages |
| |
| 12 |
REHABILITATION OF SPOT WELDING MACHINEABSTRACT The Fabrication workshop is a very important part of the Department. It handles a great responsibility of practical and Fabrication related courses. Almost the activities carried out in the Fabrication workshop are run by the use of spot welding machine; this Fabrication cannot be achieve without the uses of spot welding machine. CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUD OF THE STUDY Fro... Continue Reading »
Item Type & Format: Project Material - Ms Word |
48 pages |
| |
| 13 |
PHYSICAL AND MECHANICAL PROPERTIES OF NERICA PADDY (RICE)Abstract The determination of the physical and mechanical properties of NERICA paddy (FARO's 44(SIPI), 51(Isadane), 52(WITA 40) and 57(TOX4004 43 1 2 1)) at different moisture contents were carried out. The paddy rice was studied under un parboiled and parboiled states. The results indicate that the size ranges were 3.88mm to 5.14mm for FARO 51; 3.91mm to 4.98mm for FARO 57; 3.62mm to 4.61mm for F... Continue Reading »
Item Type & Format: Project Material - Ms Word |
58 pages |
| |
| 14 |
DEVELOPMENT OF AN IMPROVED IAR SORGHUM THRESHERABSTRACT Despite the high level of production of sorghum in Nigeria its threshing and cleaning operation remains among the major challenges to farmers especially in the northern part of the country. Efficient sorghum threshers are not available to Nigerian farmers. The prototype thresher developed at Institute for Agricultural Research (IAR) was associated with many problems such as: low out capac... Continue Reading »
Item Type & Format: Project Material - Ms Word |
52 pages |
| |
| 15 |
THE IMPACT OF AGRICULTURAL MACHANIZATION IN THE DEVELOPMENT OF AGRICULTUREABSTRACT Agricultural mechanization has been suggested as an effective for the development of agriculture in Nigeria. This study was conducted to have an analysis of the impact of agricultural mechanization in the development of agriculture.Mechanization in African agriculture has returned strongly to the development agenda, particularly following the recent high food prices crisis. The aim of thi... Continue Reading »
Item Type & Format: Project Material - Ms Word |
52 pages |
| |
| 16 |
DESIGN AND CONSTRUCTION OF GARI FRYING MACHINECHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND Cassava which is known biologically as “manihotesculentacrantz” is a crop which has many varieties. Cassava, is a perennial woody shrub in the Euphorbiaceous (Spurge family) native to South America, but now grown in tropical and sub tropical areas worldwide for the edible starchy roots (tubers) which are a major food source in the developing ... Continue Reading »
Item Type & Format: Project Material - Ms Word |
65 pages |
| |
| 17 |
EFFECT OF QUARRY DUST ON THE ENGINEERING PROPERTIES OF LATERITIC SOILSABSTRACT This research work involves the improvement of the engineering properties of laterite soil by stabilization with quarry dust on fines. The laterite used for this research work will be collected at Osogbo. The sample will be subjected to laboratory tests at the Civil Engineering Department Laboratory Futa, Akura and Osun State Ministry of Works and Transport, Osogbo. The tests will be carr... Continue Reading »
Item Type & Format: Project Material - Ms Word |
52 pages |
| |
| 18 |
PARTICIPATION OF YOUTH IN AGRICULTURAL ACTIVITIES IN JEMA’A LOCAL GOVERNMENT AREA KADUNA STATEABSTRACT This study sought to establish youth Participation in Agricultural Activities in Jema’a Local Government of Kaduna State, Nigeria. The study was necessitated by the reliance on agriculture for food production and food security, at domestic, regional and global level, which remains the backbone of the Nigerian economy, but remains unattractive to the youth. In Jem’a Local Gover... Continue Reading »
Item Type & Format: Project Material - Ms Word |
52 pages |
| |
| 19 |
STRUCTURAL DESIGN OF A POULTRY HOUSE WITHIN 4000 BIRD LAYER CAPACITY ON 900M2 LAND AREACHAPTER ONE 1.0 Introduction 1.1 Background of the Study The word “poultry” came from the French/Norman word poule, itself derived from the Latin word Pullus, which means small animals. “The American Heritage dictionary of the English Language, 4th edition. Houghton Mifflin Company by American Heritage, (2006). Poultry however are domesticated birds kept my human for meat, feathe... Continue Reading »
Item Type & Format: Project Material - Ms Word |
88 pages |
| |
| 20 |
ESTABLISHMENT OF DEPARTMENTAL LAWNCHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND OF THE STUDY Green lawn, according to Barre (1950) is the maintenance of a perennial green vegetation cover for a premises. It is a form of competing the landscape of an area. The well established aforestation and maintenance of departmental lawn and the growing of some flowers would constitute a good land scope. The lawn establishment and maintenance, a... Continue Reading »
Item Type & Format: Project Material - Ms Word |
29 pages |
| |
Instant Download
Cannot find your topic?.. Search for the Project Topic now. It saves time and it is easy
Download UNDERGRADUATE Agricultural Engineering Final Year Research Project Topics - Free Project Topics | Codemint and Research Materials. Get Complete Chapter 1-5 Project Materials and Research Topics for HND, BSc, MSc in Doc & PDF. Final Year Projects and Research Materials on CodeMint